Dynamic Response of a Long-Span Double-Deck Suspension Bridge and Its Vibration Reduction

This paper presents a dynamic analysis of a long-span double-deck suspension bridge subjected to random traffic loading using a Finite Element (FE) model. During this study, the influence of various traffic parameters, such as vehicle speed, traffic volume, traffic weight, and the location of the passing girder, on the longitudinal movement of the girders was investigated. The results reveal that schemes with double girders passing can lead to greater longitudinal displacement of the girder as compared to a long-span bridge with a single passing girder. However, the incorporation of fluid-viscous dampers at the ends of the girders significantly reduces the displacement range of each node. For instance, at the left end of the bridge, the original model (without dampers) exhibits a displacement range of approximately 0.01–0.056 m, whereas the constrained model (with dampers) shows a range of 0.025–0.033 m. A quantitative analysis demonstrates that higher damping coefficients (or smaller damping exponents) can further mitigate the girder’s movement.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.