0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Dynamic Response Measurement and Finite Element Analysis of Large-Span Pedestrian Corridor

Autor(en):

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 11, v. 13
Seite(n): 2857
DOI: 10.3390/buildings13112857
Abstrakt:

The natural frequency of the long-span steel structure corridor is close to the pedestrian step frequency, which makes it very easy to cause resonance. This paper aims to study crowd-induced vibration control of long-span steel pedestrian corridors with different dynamic characteristics by combining methods of site measurement and numerical simulation. First, based on the steel structure corridor project of a multi-tower structure, the field modal test and the acceleration response under pedestrian load excitation are measured, and the dynamic characteristics and acceleration response under different frequency pedestrian loads are studied. Then, the finite element model of the large-span corridor is established, and the results of the measured and numerical simulation are compared and analyzed. Finally, with the relevant norms, a reasonable evaluation of pedestrian comfort is carried out. The results show that this paper’s measured and finite element results have a certain accuracy. The damping characteristics of humans can absorb the vibration energy of the structure to reduce the vibration acceleration of the structure, and the results are conservative when human action is not considered. After installing the TMD system, the acceleration response of the corridor is significantly reduced, and the vibration reduction effect reaches 54%, which meets the comfort control requirements of the large-span corridor under pedestrian load excitation. The research results and methods in this paper can have particular engineering practical values for carrying out field measurements and comfort control in similar projects and provide a reference for engineering designers.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10754047
  • Veröffentlicht am:
    14.01.2024
  • Geändert am:
    07.02.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine