Durability Evaluation of Concrete in Cold and Arid Regions Based on Grey Relational Theory
Autor(en): |
Li Gong
Ying Liang Bingzong Zhang Xuelei Gong Yiqun Yang |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Advances in Civil Engineering, Januar 2022, v. 2022 |
Seite(n): | 1-10 |
DOI: | 10.1155/2022/6287810 |
Abstrakt: |
Aiming at the outstanding problem of concrete durability in cold and arid regions, the Datonghe-Qingwangchuan Diversion Project in Gansu Province, China, was used as a typical research area, and erosion products were determined by field sampling and laboratory XRD analysis. Three durability evaluation indices, namely, the mass loss rate, relative dynamic elastic modulus (RDEM), and compressive strength loss rate, were measured via indoor accelerated testing. Based on grey relational theory, a concrete durability evaluation model was constructed. The critical failure values of the three evaluation indices were introduced as a set of data to optimize the model and determine the grey relational degree of each group of concrete specimens under different working conditions. The results show that using the test results and the optimized grey relational analysis evaluation model, the concrete specimens mixed with an air-entraining agent have strong resistance to composite erosion. The durability of concrete specimens with an air-entraining agent content of 0.016% and fly ash content of 15% is better, and a high content (30%) of fly ash accelerates the damage of concrete specimens. The model calculations are consistent with the test results. This method can solve the problem of the durability of concrete specimens in the whole test cycle not being fully evaluated. The results of the study provide useful references for concrete mix proportion optimization and durability evaluation problems. |
Copyright: | © Li Gong et al. et al. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
0.6 MB
- Über diese
Datenseite - Reference-ID
10698148 - Veröffentlicht am:
11.12.2022 - Geändert am:
15.02.2023