Diagonal Tension Cracking Strength and Risk of RC Deep Beams

This study focuses on the shear serviceability of simple and continuous reinforced concrete deep beams. The test results of 81 simple deep beams (i.e., simply supported single-span deep beams) and 29 continuous deep beams, for which their diagonal tension cracking loads were reported, were collected from existing studies. On this basis, the diagonal tension cracking mechanism is discussed, and four existing models for diagonal tension cracking are evaluated. The evaluation results show the existing models fail to accurately reflect the influences of the main design parameters (including the shear span-to-effective depth ratio and main tensile reinforcement ratio) on the diagonal tension cracking strength. Therefore, a new equation for the diagonal tension cracking strength for simple and continuous deep beams is proposed. The proposed equation is verified to be superior to the existing models, showing an average value and a coefficient of variation for tested-to-predicted diagonal tension cracking strength ratios of 1.02 and 0.21, respectively. On the other hand, a probabilistic analysis is conducted to evaluate the diagonal tension cracking risk under service load, showing that 35% of deep beams exhibited a diagonal tension cracking load that is less than the service load, which indicated that diagonal cracks easily occur in RC deep beams under service loads.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.