Development of Self-Compacting Concrete Incorporating Rice Husk Ash with Waste Galvanized Copper Wire Fiber
Autor(en): |
Md. Habibur Rahman Sobuz
Ayan Saha Jannatul Ferdous Anamika Moustafa Houda Marc Azab Abu Sayed Mohammad Akid Md. Jewel Rana |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Buildings, 5 Juli 2022, n. 7, v. 12 |
Seite(n): | 1024 |
DOI: | 10.3390/buildings12071024 |
Abstrakt: |
This research work is devoted to the experimental investigation of both rheological and mechanical properties of self-compacting concrete (SCC) produced with waste galvanized copper wire fiber and rice husk ash (RHA). In the study, three different volume fractions of 0.5 p to 0.75 percent, 1 percent of scrap copper wire fiber as reinforcing material, and 2 percent RHA as cement replacement were used. To evaluate the fresh characteristics of SCC, the slump flow, J-ring, and V-funnel experiments were conducted for this investigation. Compressive strength, splitting tensile strength, and flexural strength of the concrete were conducted to assess the hardened properties. The test was carried out to compare each characteristic of plain SCC with this modified SCC mixture, containing RHA as pozzolanic materials and copper fiber as reinforcing material. Incorporating copper fiber in the SCC leads to a drop in fresh properties compared to plain SCC but remains within an acceptable range. On the other hand, the inclusion of 2% RHA makes the SCC more viscous. Although adding 2% RHA and 1% copper wire in SCC provide the highest strength, this mix has an unacceptable passing ability. The SCC mix prepared with 2% RHA and 0.75% copper fiber is suggested to be optimum in terms of the overall performance. According to this study, adding metallic fiber reinforcement like copper wire and mineral admixture like RHA can improve the mechanical properties of SCC up to a certain level. |
Copyright: | © 2022 by the authors; licensee MDPI, Basel, Switzerland. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
7.74 MB
- Über diese
Datenseite - Reference-ID
10688497 - Veröffentlicht am:
13.08.2022 - Geändert am:
10.11.2022