Development of a Low-Density Waste-Based Geopolymer Construction Material

The construction industry, integral to national infrastructure development, faces environmental challenges attributed to Portland cement’s high energy consumption and carbon dioxide emissions during production. To address this challenge, this study integrated waste fly ash and polystyrene into geopolymers to enhance environmental sustainability and economic feasibility. The objectives included developing low-density geopolymers using polystyrene inclusion, optimizing component mixing ratios, assessing activator concentration effects, determining the optimal curing conditions, and characterizing the resulting geopolymers. Through experimental investigation, low-density geopolymers were developed with optimized component ratios and curing conditions. The experimental procedure began with the classification of fly ash to determine its suitability for various applications, revealing it to be type F. Geopolymers were fabricated using a mixture of fly ash, water, sodium hydroxide activator, and polystyrene. Varied concentrations of sodium hydroxide and polystyrene were employed. Two curing temperatures, 60 °C and 100 °C, were explored. The results showed that greater sodium hydroxide concentrations improved the structure and compressive strength of the geopolymers. The results also demonstrated a significant correlation between the curing conditions and the mechanical properties of the produced geopolymers. The goal of reducing the density of the geopolymers for lightweight thermal-resistant applications was achieved through polystyrene incorporation. However, polystyrene incorporation negatively impacted the compressive strength. The optimum production conditions for the sodium hydroxide-varied samples were 8 g sodium hydroxide/g sample cured at 100 °C, while the optimum production conditions for polystyrene-varied samples were 1 g polystyrene/g sample cured at 60 °C. The findings confirmed the viability of utilizing fly ash and polystyrene wastes to produce sustainable, low-density, thermal-resistant construction materials. Overall, increasing activator concentration enhances the strength and durability of geopolymers, while polystyrene contributes to the development of lightweight geopolymers, provided the appropriate amount is utilized. To ensure replicability, the formulation procedure and input quantities must be tailored according to the intended geopolymer application. These insights offer practical guidance for optimizing geopolymer manufacturing processes towards enhanced sustainability and performance.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.