Developing and Applying a Double Triangular Damping Device with Equivalent Negative Stiffness for Base-Isolated Buildings

A passive double triangular damping (DTD) device with equivalent negative stiffness is proposed in this study. The DTD device consists of transmission systems and triangular damping systems. A mechanical model was developed to describe the force–displacement relationship of a triangular damping system, while the feasibility of both the system and model was evaluated using experimental tests. The theoretical analysis demonstrated that DTD was a form of damping with equivalent negative stiffness, and the equivalent expressions were generated. Finally, the prospect of application in the DTD-controlled isolation system was explored using numerical simulation. The results revealed that DTD was more effective than a lead–rubber bearing in reducing isolator displacement and rooftop acceleration when subjected to ground motions.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.