0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Autor(en):

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Engineering Journal, , n. 1, v. 26
Seite(n): 9-20
DOI: 10.62913/engj.v26i1.514
Abstrakt:

Tee framing connections are listed as one of the shear connections in the AISC Manual11 and are used in steel structures as simple connections. However, the published information on actual behavior and design of this type of connection is very limited. Figure 1 shows typical applications of tee connections in steel structures. The fasteners in tee connections can be either weld lines or bolts. There are four variations of tee connections with various combinations of bolts and welds. Based on interviews with steel fabricators, it appears that the degree of popularity of four connections in Fig. 2 is in the order of types "a", "c", "d" and "b" where type "a" is the most popular and efficient one. This paper is concerned with the behavior and design of tee connections shown as "a" in Fig. 2 where the tee section is bolted to the beam web and welded to the support.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.62913/engj.v26i1.514.
  • Über diese
    Datenseite
  • Reference-ID
    10783014
  • Veröffentlicht am:
    17.05.2024
  • Geändert am:
    17.05.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine