Design of Smart Cable for Distributed Cable Force Measurement in Cable Dome Structures and Its Application

The stay cable is one of the most critical structural components of a cable dome structure. However, during its service life, it may lose its stiffness due to environmental factors and metal fatigue, thus making the structure a safety hazard. As the most important mechanical physical parameter of the cable, it is necessary to create a health-monitoring method to ensure the safety of the structure. In this study, a smart cable with a fiber optic Bragg grating (FBG) sensor is proposed. The sensor is embedded in the Z-shaped cable of the stay cable to ensure the simultaneous deformation of the sensor and cable. The monitoring of the cable force can be achieved after obtaining the relationship coefficient between the sensor and the cable force. In the rest of the paper, the sensing principle and fabrication procedure are described. A series of tests are conducted to verify the sensing performance of the smart cable. Finally, the dynamic monitoring and long-term monitoring of the cable force in the cable-supported grid system of Dalian Suoyuwan Football Stadium are carried out by using the smart cable, and the stability and safety of the structure are evaluated by the monitoring results.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.