Design and Thermal Characterization of Two Construction Solutions with and without Incorporation of Macroencapsulated PCM

Improving the energy efficiency of new and existing building stock while fostering the use of renewable energy is one of the major goals of the Renovation Wave initiative promoted by the European Union. In this framework, the present research focuses on the design of an innovative and efficient construction solution for an external envelope and internal partitions that can improve energy efficiency and thermal comfort in lightweight construction technology for buildings. The use of phase change materials (PCMs), particularly in the macroencapsulated form, in building construction solutions or components enhances the buildings’ thermal mass without significantly increasing the solutions’ weight. Therefore, the solution herein developed is essentially targeted at lightweight building technology since the incorporation of a macroencapsulated PCM core will allow to store and release large amounts of energy per volume unit, in order to attenuate high indoor temperature fluctuations. In the scope of this study, the use of a thermally active core in a lightweight construction solution was designed and thermally characterized. Thus, an experimental campaign on the thermal properties of the solution containing macroencapsulated PCMs was performed, intended for applications in two twin full-scale cold-formed steel lightweight tiny houses. Regarding the hot box heat flux meter approach, the results revealed the following: good correlation between thermal conductivity and mean specimen temperatures for both construction assemblies tested, and significant thermal amplitude reduction with the use solution containing the macroencapsulated PCM core.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.