Design and Non-Linear Modeling of New Wind Girder Used for Bolted Tanks

Large-capacity bolted cylindrical tanks for liquid storage are used in many applications. The tanks are made of thin steel sheets that are connected by bolts. A common problem associated with tanks is deforming under extreme loads. Adding wind girders to the tank increases the tank’s buckling capacity, which is defined as the limit load at which the structure loses stability. The girders are usually placed in the horizontal joints of the tank wall. The girders are bent from standard or non-standard steel bars with a uniform cross-section. This type of design is difficult to produce, especially with large profiles or large curvatures, to avoid distortion of the cross-section during bending. Furthermore, the girders are customized to the given openings and curvature for various tank diameters. The resulting solution is then uneconomical and more complicated to store. This paper deals with the design and non-linear modeling of a new shape of wind girder for bolted tanks that eliminates the above-mentioned disadvantages. To analyze the new shape of the girder, a non-linear numerical model of an open-topped tank with various dimensions is designed to study its buckling capacity.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.