Design and Analysis of a Novel Prefabricated Foundation for Substation Buildings

In recent years, prefabricated components have been widely used in the construction of substation superstructures, while cast-in-place foundations remain the primary method for substation foundations. This paper presents and evaluates a novel prefabricated foundation design aimed at enhancing construction efficiency and load-bearing performance. The foundation features a modular design, with each module weighing only half that of a cast-in-place foundation of the same size, significantly improving construction convenience and transportation efficiency. The load-bearing performance of the foundation was validated through static load tests and finite element modeling. The results indicate that the foundation demonstrates excellent ductility, with flexural failure as the primary mode, characterized by multiple cracks across the mid-span and complete yielding of longitudinal reinforcing steels. Further parametric analysis shows that increasing the plate thickness ratio (λ) improves the ultimate bearing capacity of the foundation significantly. Additionally, enlarging the cross-sectional size of the shear key or increasing the strength of the wet joint material enhances overall structural synergy, reduces local deformation, and improves load distribution efficiency. Overall, the sensitivity order of factors influencing the bearing capacity of the new prefabricated foundation is plate thickness ratio (λ) > wet joint strength > shear key cross-sectional size.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.