Deformation Analysis and Reinforcement Effect Evaluation for the No. 65 Slope on the Shangsan Expressway Based on SBAS-InSAR
Autor(en): |
Dongxin Bai
Guangyin Lu Huihua Hu Hang Lin Changfu Chen Xuan Wang |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Buildings, 22 Oktober 2024, n. 11, v. 14 |
Seite(n): | 3582 |
DOI: | 10.3390/buildings14113582 |
Abstrakt: |
The deformation of the No. 65 slope on the Shangsan Expressway poses a potential threat to road safety. In July 2021, the deformation rate of this slope accelerated significantly, leading to the implementation of reinforcement measures in 2022. To comprehensively analyze the historical deformation characteristics of the slope and evaluate the effectiveness of the reinforcement measures, this study employs Small Baseline Subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) technology to calculate and analyze the historical deformation characteristics of the slope and the adjacent hillside for two periods: from 10 January 2018 to 22 August 2021, and from 3 September 2021 to 22 December 2023. The SBAS-InSAR monitoring results were compared with in situ data from borehole inclinometers to verify the reliability of the calculations. The SBAS-InSAR results indicate that before reinforcement, the slope exhibited slow movement; however, after the implementation of the reinforcement measures, the displacement significantly decreased, demonstrating the success and effectiveness of the interventions. The consistency between the SBAS-InSAR results, borehole inclinometer data, and surface observations confirms the substantial potential of SBAS-InSAR technology for slope engineering monitoring. |
Copyright: | © 2024 by the authors; licensee MDPI, Basel, Switzerland. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
68.93 MB
- Über diese
Datenseite - Reference-ID
10810117 - Veröffentlicht am:
17.01.2025 - Geändert am:
25.01.2025