0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Defining the Mathematical Dependencies of NOx and CO Emission Generation after Biomass Combustion in Low-Power Boiler

Autor(en): (Technical university of Košice , Faculty of Materials, Metallurgy and Recycling, Institute of Metallurgy , Letná 9, 042 00 Košice , Slovak Republic)
(Technical university of Košice , Faculty of Materials, Metallurgy and Recycling, Institute of Metallurgy , Letná 9, 042 00 Košice , Slovak Republic)
(Technical university of Košice , Faculty of Materials, Metallurgy and Recycling, Institute of Metallurgy , Letná 9, 042 00 Košice , Slovak Republic)
(Department of Ecology, Heat Transfer and Labour Protection , National Metallurgical Academy of Ukraine , Gagarine av. 4, Dnipro , Ukraine)
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Civil and Environmental Engineering Reports, , n. 3, v. 29
Seite(n): 153-163
DOI: 10.2478/ceer-2019-0031
Abstrakt:

The paper deals with the study of the influence of various factors, which have an impact on emissions such as NOx, CO, which have been verified by measurements. Biomass in the form of wood chips as fuel of different moisture content from 9% to 25% has been tested at various boiler outputs. The presented work also defines the mathematical dependencies of NOx and CO emission generation by using regression analysis from measured data after biomass combustion in low-power boilers. The paper also describes a mathematical model of biomass combustion. The mathematical model was created to verify the measured data and prediction of emission generation in the process of biomass combustion. This model consists of combustion of stoichiometry, calculation of combustion temperatures, obtained regression equations of NOx and CO. At the end of this paper, the obtained results are compared with the calculated models as well as the results of the defined dependencies from the regression analysis.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.2478/ceer-2019-0031.
  • Über diese
    Datenseite
  • Reference-ID
    10705186
  • Veröffentlicht am:
    19.02.2023
  • Geändert am:
    19.02.2023
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine