Damage Evaluation of Fabricated Shear Wall Reinforced with Angle Steel Using Acoustic Emission Technology

The fabricated shear wall with a grouting sleeve is used widely in structural engineering. The damage characteristics of a fabricated shear wall reinforced with angle steel of inadequate grouted material strength were investigated using acoustic emission (AE) technology under a horizontal repeated load. The results showed that evaluation of the AE energy and Ib value exposed the crack expansion and damage evolution of the fabricated shear walls; the sudden rise in the energy level predicted the occurrence of micro-cracks in the shear wall. The trends of the AE accumulated energy and accumulated hysteretic energy of the specimens had a good correlation. The AE Ib value results illustrated that the destruction was most serious inside the shear wall with an inadequate grouted material strength at the failure stage. The trends of AE HI and Sr could better characterize the crack propagation of the shear walls. The AE damage model was proposed based on the Park–Ang damage model incorporating fractal energy density, which could effectively evaluate the damage degree of shear walls under repeated loading.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.