Creep Characteristics of Reconstituted Silty Clay under Different Pre-Loading Path Histories

Due to the long-term deformation settlement of foundations, issues such as damage and functional failure of buildings and structures have long been a concern in the engineering field. The creep of soil is one of the primary causes leading to long-term deformation of foundations. In this paper, the consolidation deformation, creep characteristics, and creep model of reconstituted saturated silty clay were studied using the isotropic consolidation creep test and triaxial compression creep test. The results show that for the isotropic consolidation creep test, although the applied load adopted different stages of loading, as long as the final applied confining pressure was the same, the number of stages applied by the confining pressure had little effect on the final isotropic consolidation deformation of the sample and the triaxial undrained shear strength after creep. However, for the triaxial shear creep test, it was found that under the same final deviatoric stress, the final deviatoric strain of the sample was closely related to the number of loading stages of deviatoric stress. The test showed that the more loading stages with the same deviatoric stress, the smaller the final deviatoric strain, and the triaxial undrained shear strength of the sample after creep increased. In addition, it was reasonable to set the pore pressure dissipation of the sample at 95% ((u0 − u)/u0 = 95%) as the time (t100) at which the primary consolidation of the soil sample was completed. The isotropic consolidation creep curves and the triaxial compression creep curves showed certain non-linearity. Then, the logarithmic model and the hyperbolic model were used to fit the creep curves of the samples. It was found that the hyperbolic model had a better fitting effect than the logarithmic model, but for the triaxial compression creep test, the creep parameters of the sample changed greatly. Therefore, studying the creep characteristics of soil under different pre-loading steps is of significant engineering importance for evaluating the long-term deformation of underground structures.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.