0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Construction Sector Transition towards Smart Applications of Graphene Oxide in Cement-Based Composites: A Scientometric Review and Bibliometric Analysis

Autor(en): ORCID
ORCID
ORCID
ORCID
ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 10, v. 14
Seite(n): 3042
DOI: 10.3390/buildings14103042
Abstrakt:

Cement-based composites (CBCs) are essential in the construction sector due to their cost-effectiveness, availability, and versatility, but they struggle with low tensile strength and poor heat resistance. Recent advancements have highlighted the potential of nanomaterials, particularly graphene oxide (GO), in enhancing the mechanical, thermal, and electrical properties of CBCs. This study aims to provide a comprehensive review of the incorporation of GO into cementitious composites, examining its impact on microstructure, mechanical properties, rheology, and durability; thus, a bibliometric review and scientometric analysis were conducted to thoroughly evaluate the existing literature. A total of 263 studies were selected for thorough study. It can be concluded that GO content acts as a pore filler, decreasing porosity by 23% and average pore size by 22%, while boosting compressive strength by up to 15% at a 0.05% concentration. It also enhances workability, stability, and resistance to chloride ingress, sulfate attack, alkali–silica reaction, and carbonation. Incorporating GO reduces cement consumption and carbon footprint, leading to more durable structures and supporting sustainable construction by efficiently utilizing waste materials. The optimal GO concentration for these benefits ranges from 0.03% to 0.1% by weight of cement, as higher concentrations may cause agglomeration. GO-modified cementitious materials are well suited for high-performance and durable applications, particularly in environments with chemical and mechanical stresses.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10804932
  • Veröffentlicht am:
    10.11.2024
  • Geändert am:
    25.01.2025
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine