0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Comprehensive Assessment of the Effectiveness of the Application of Foam and Extruded Polystyrene in the Railway Substructure

Autor(en):

ORCID
ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 1, v. 14
Seite(n): 31
DOI: 10.3390/buildings14010031
Abstrakt:

This article presents the authors’ comprehensive evaluation of the application of specific foam thermal insulation materials, namely expanded polystyrene (EPS) and extruded polystyrene (XPS), within railway substructures. The assessment extends to real-world conditions on the tracks of Slovak Railways (ŽSR), which share substantial similarities with other countries’ railway networks. The assessment of structural composition and material selection considers these technical aspects, while technological feasibility and the environmental implications associated with material production, delivery, and incorporation into railway construction do not. Additionally, the thermal insulation materials’ qualities are compared against conventional railway substructure materials. In these conventional setups, the thermal insulation layer often incorporates crushed aggregate of specified fractions and parameters in line with legislative standards. This article complements previous research conducted at the University of Žilina, focusing on the application of various thermal insulation materials within railway substructures. These materials were both experimentally tested (scale of 1:1) and numerically modelled, with results previously published by the authors. The published works detail the utilisation of diverse thermal insulation materials in railway substructures, primarily evaluating two crucial technical parameters: the protection of the subgrade surface against adverse effects of frost and, secondarily, their impact on the deformation resistance of the railway substructure.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10753468
  • Veröffentlicht am:
    14.01.2024
  • Geändert am:
    07.02.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine