Challenges in material recycling for postwar reconstruction
Autor(en): |
Viacheslav Troian
Volodymyr Gots Emmanuel Keita Nicolas Roussel Ueli Angst Robert J. Flatt |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | RILEM Technical Letters, August 2022, v. 7 |
Seite(n): | 139-149 |
DOI: | 10.21809/rilemtechlett.2022.171 |
Abstrakt: |
Besides the fact that concrete recycling allows to avoid landfills disposal and contributes to a closed-cycle economy, such option may be very much in demand in war struck regions such as Ukraine, which after the end of the war, are faced with the problem of rebuilding and reconstructing. Beyond this emergency, even in peacetime extensive parts of the building stock will sooner or later need to be replaced and concrete recycling is called to play an increasing role there. However, depending on the technology and degree to which aggregates are recycled, concrete may be characterized by poor workability, reduced mechanical properties, increased shrinkage and reduced durability. This deterioration in the properties of recycled concrete is usually attributed to the characteristics of the old cement mortar remaining on the surface of the recycled aggregates, which is best considered as an additional volume of hardened cement paste with fine aggregate and additional porosity. This article attempts to underline how such key concepts help frame the current state of knowledge about concrete recycling, understand the implications of existing regulations, in order to define pragmatic and efficient routes for broadening the use of concrete recycling in war struck regions, with specific examples regarding Ukraine. |
Copyright: | © Viacheslav Troian, Volodymyr Gots, Emmanuel Keita, Nicolas Roussel, Ueli Angst, Robert J. Flatt |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
0.87 MB
- Über diese
Datenseite - Reference-ID
10715872 - Veröffentlicht am:
21.03.2023 - Geändert am:
10.05.2023