Case Study of Space Optimization Simulation of Existing Office Buildings Based on Thermal Buffer Effect

This paper takes an old office building in Hefei as the research object to explore the influence of the thermal buffering performance of the case building buffer space on the air speed and thermal environment of the office space based on the field measurement and simulation. As the thermal buffer layer of the main space, the buffer space is the layout mode that follows the thermal transfer law. Building buffer space variables were evaluated and compared by orthogonal tests to determine the better combination of buffer space sizes. The results show that when the air speed is taken as the evaluation index, the influence of each buffer space on the indoor environment is ordered: courtyard > corridor > foyer; when the temperature is taken as the evaluation index, the influence of each buffer space on the indoor environment is ordered: courtyard > foyer > corridor. From the perspective of green transformation, this paper selects two better schemes. Through comparison, it is found that when the buffer space size is: corridor (16 m × 2 m × 3.3 m), courtyard (16 m × 12 m) and foyer (7.2 m × 6 m × 3.3 m) is the optimal scheme, the indoor air speed is increased by 0.1 m/s, and the temperature is reduced to 27.0 °C, which is within the thermal comfort range of the human body. It is found that optimizing the buffer space size of the case building can effectively improve its indoor air speed and thermal environment, and provide theoretical basis and reference for the green transformation of existing buildings of the same type in this area.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.