0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

A Car-Following Model Based on Safety Margin considering ADAS and Driving Experience

Autor(en): ORCID
ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2021
Seite(n): 1-10
DOI: 10.1155/2021/6619137
Abstrakt:

Existing studies had shown that advanced driver assistance systems (ADAS) and driver individual characteristics can significantly affect driving behavior. Therefore, it is necessary to consider these factors when building the car-following model. In this study, we established a car-following model based on risk homeostasis theory, which uses safety margin (SM) as the risk level quantization parameter. Firstly, three-way Analysis of Variance (ANOVA) was used to analyze the influencing factors of car-following behavior. The results showed that ADAS and driving experience have a significant effect on the drivers’ car-following behavior. Then, according to these two significant factors, the car-following model was established. The statistical method was used to calibrate the parameter reaction response τ. Other four parameters (SMDL, SMDH, α1, and α2) were calibrated using a classical genetic algorithm, and the effects of ADAS and driving experience in these four parameters were analyzed using T-test. Finally, the proposed model was compared with the GHR model, and the result showed that the proposed model has a smaller Root Mean Square Error (RMSE) than the GHR model. The proposed model is a method of simulating different driving behaviors that are affected by ADAS and individual characteristics. Considering more driver individual characteristics, such as driving style, is the future research goal.

Copyright: © 2021 Yugang Wang and Nengchao Lyu et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10578437
  • Veröffentlicht am:
    02.03.2021
  • Geändert am:
    02.06.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine