Building Configuration of Low-Cost Apartments in Bandung—Its Contribution to the Microclimate and Outdoor Thermal Comfort
Autor(en): |
Beta Paramita
Hiroatsu Fukuda Rendy Perdana Khidmat Andreas Matzarakis |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Buildings, August 2018, n. 9, v. 8 |
Seite(n): | 123 |
DOI: | 10.3390/buildings8090123 |
Abstrakt: |
This paper aims to find the microclimate aspect within the building form and configuration of five low-cost apartments (henceforth rusun) in Bandung, Indonesia. There are parallel, square, and interspersed plots investigated with specific discussion on the microclimate aspects that gain human perception of outdoor thermal comfort. The microclimate prognostic model, i.e., ENVI-met, was used to determine the mean radiant temperature (Tmrt), which was then used to describe the living quality of outdoor thermal comfort, i.e., PET (physiologically equivalent temperature) in a hot-humid climate context. A parallel plot with building orientation toward north-south was found as the most beneficial building form and configuration. Somehow, the parallel plot toward the west-east orientation did not provide similar performance. Nevertheless, the square plot provided uncomfortable perception as there was an absence of building shade within the wide open space and ground cover to absorb the insolation. The interspersed plot can be considered for the building configuration because it generates more wind among other plots. The building form and configuration of rusun with passive design seems to not be able to achieve outdoor thermal comfort. The highest PET value of Model D with the square plot had PET = 41 °C (hot) while the lowest PET in Model A with the parallel plot (N-S) had PET = 34.2 °C (slightly warm). |
Copyright: | © 2018 by the authors; licensee MDPI, Basel, Switzerland. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
6.15 MB
- Über diese
Datenseite - Reference-ID
10324802 - Veröffentlicht am:
22.07.2019 - Geändert am:
02.06.2021