0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Behavior and Modeling of CFRP-Strengthened Rectangular Steel Tubes Subjected to a Transverse End Bearing Load

Autor(en):


Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: International Journal of Structural Stability and Dynamics, , n. 8, v. 15
Seite(n): 1540031
DOI: 10.1142/s0219455415400313
Abstrakt:

The end bearing capacity of a rectangular hollow section (RHS) steel tube can be substantially increased through local strengthening using bonded carbon fiber reinforced polymer (CFRP) plates. This paper presents a combined experimental and numerical study into the behavior of such CFRP-strengthened RHS steel tubes with particular attention to debonding failure in such tubes. The results of an experimental study are first presented, which showed that debonding failure occurred in all the CFRP-strengthened steel tubes and the effectiveness of strengthening depended significantly on the slenderness of the webs. A finite element approach for modeling the behavior of such CFRP-strengthened steel tubes is next presented, in which a coupled cohesive zone model is employed to depict the response of FRP-to-steel bonded interfaces with a linear or a nonlinear adhesive. The finite element approach, which is shown to provide close predictions for CFRP-strengthened RHS steel tubes under an end bearing load, offers a valuable tool for understanding the behavior of these CFRP-strengthened steel tubes.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.1142/s0219455415400313.
  • Über diese
    Datenseite
  • Reference-ID
    10352603
  • Veröffentlicht am:
    14.08.2019
  • Geändert am:
    14.08.2019
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine