Assessment of the Compound Damping of a System with Parallelly Coupled Anti-Seismic Devices

(1) Background: Romanian earthquakes caused severe damage over time to a significant number of constructions, and that is why efforts are being made to make structural systems safer. (2) Methods: For structural systems with protection against seismic actions or vibrational actions that have linear viscous dissipation devices, the requirement to assess the equivalent modal damping rate for the entire functional assembly related to the other dynamic parameters arises. (3) Results: This article presents the analytical development of formulas for the compound damping and circular frequency when anti-seismic devices have different dynamic characteristics and their application in order to solve some real engineering cases of bridges and viaducts in Romania with distinct viscoelastic supports. In support of this idea, some experimental tests on a beam system resting on two different anti-seismic elastic supports highlighted the fact that the compound damping of the system can be calculated with the relations established in this paper, provided that the displacements in the horizontal direction of excitation are in the linear domain. Also, we determined the seismic response considering the Vrancea 1977 accelerogram for critical damping ratios of 5% and 18.5%, and then we obtained the variation in the factor of transmissibility depending on the frequency, in order to highlight the optimized value of the equivalent amortization/damping. (4) Conclusions: In the specific context of Romanian seismicity, seismic isolation through the use of isolators with different characteristics represents an optimal technical solution, and it is also optimal from an economic point of view, with an appropriate level of dynamic isolation obtained.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.