Applying Feasibility Investigation of Resin Modifying Agent in Asphalt Pavement Materials

In order to promote the resin modifying agent applied into pavement materials, a type of resin modifying agent was selected as the modifier to prepare modified asphalt. The molecular crystal structure of the modifying material was characterized by using the X-ray diffraction test (XRD). The microstructure and element composition of PA6 was investigated through focused ion beam scanning electron microscopy (FIB-SEM). The thermal property and functional groups of PA6 were studied by thermogravimetric analysis-Fourier infrared spectroscopy (TG-FTIR) test. The physical property and rheological properties of PA modified asphalt were evaluated to confirm the applying feasibility of PA6 in asphalt. The results indicated that PA6 was the semicrystalline polymer and the existence of γ crystal form might improve the toughness of asphalt materials effectively. The thermal decomposition process of PA6 could be divided into three stages roughly: inert weight loss stage, rapid weight loss stage, and stable stage. The amount of PA6 modifier should be appropriately controlled during the application process to ensure the comprehensive effect of PA6 on high-temperature performance and low-temperature performance. The corresponding initial modulus attenuation value of PA modified asphalt was less than 70# asphalt under the same test conditions.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.