The Application of WMA Technology to Bituminous Base Course Mixes
Autor(en): |
Rajan Choudhary
Asho Julaganti Abhinay Kumar Dipak Arjun Ugale |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | The Baltic Journal of Road and Bridge Engineering, Juni 2018, n. 2, v. 13 |
Seite(n): | 94-103 |
DOI: | 10.7250/bjrbe.2018-13.403 |
Abstrakt: |
Warm Mix Asphalt, due to lower mixing and compaction temperatures, provides some engineering benefits over conventional Hot Mix Asphalt. In this study, an attempt is made to assess the viability of using Warm Mix Asphalt technology in bituminous base courses. An organic wax-based Warm Mix Asphalt additive was used in this study to produce Dense Bituminous Macadam, a commonly used bituminous base course mix in India. Experimental variables included three additive contents and four mixing temperatures. Rheological properties of binder modified with different doses of additive were examined. In all, twelve Warm Mix Asphalt Dense Bituminous Macadam mix types were prepared, evaluated and compared with Hot Mix Asphalt Dense Bituminous Macadam (control) mix. Rheological test results showed the addition of wax-based additive improved stiffness and resistance against permanent deformation of the base binder. Tensile Strength Ratio and retained Marshall Stability results indicated that Warm Mix Asphalt Dense Bituminous Macadam mixes were resistant to moisture-induced damage. |
Copyright: | © 2018 Rajan Choudhary, Asho Julaganti, Abhinay Kumar, Dipak Arjun Ugale |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
1.24 MB
- Über diese
Datenseite - Reference-ID
10084549 - Veröffentlicht am:
09.10.2018 - Geändert am:
02.06.2021