Application of Graphic Statics and Strut-and-Tie Models Optimization Algorithm in Innovative Timber Structure Design

Timber has long been extensively employed within the construction industry as a famous, environmentally friendly, and low-carbon material. Considering that construction constitutes one of the most significant contributors to carbon emissions throughout the entire life-cycle of a building, there is an urgent desire to incorporate timber into this domain. Nevertheless, the use of timber faces inherent challenges stemming from its anisotropic nature, a result of the natural growth of timber fibers, which makes it challenging for it to function as a primary load-bearing material in coping with the various complex stresses inherent in architectural applications. Numerous designers have attempted to address this limitation through over-sized members and reinforcement at joints; however, none have satisfactorily resolved this issue in an economical manner. In this article, we introduce the Strut-and-Tie models (STM) from Graphic Statics (GS) and a topological optimization algorithm. This algorithm has the capability to generate a ‘load-minimizing path’ STM based on external load support conditions and the maximum structural path span. Regardless of the complexity of the initial external loads, each load transfer path in the optimized STM bears loads in only one direction, representing an optimal solution with minimal internal loads that align seamlessly with the characteristics of timber. Consequently, we endeavor to adopt this optimization algorithm to propose a structural design methodology, with the aspiration of designing structural systems that harness the unique attributes of timber perfectly and applying them to various architectural scenarios. Ultimately, we conclude that structural systems designed based on optimized STM are adaptable to diverse architectural contexts, and when applied to small-scale buildings, this method can save approximately 20% of material consumption compared to conventional timber frame structures, while in the case of mid-rise to high-rise buildings, it can lead to a material savings of approximately 5%.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.