Anchor Force Monitoring Using Impedance Technique with Single-Point Mount Lead-Zirconate-Titanate Interface: A Feasibility Study

As a key load-bearing element in a prestressed structure, the anchor should be appropriately monitored to secure its as-built prestressing force. In previous studies, the impedance-based prestress force monitoring technique through a mountable lead–Zirconate–Titanate (PZT) interface was developed. However, the previous design of the PZT interface uses a two-point mount technique through two bonding layers, causing inconveniences during installation and replacement processes. To address this issue, we propose an alternative PZT interface model for prestress force monitoring based on the impedance method. The proposed model uses a single-point mounting technique that allows it to be more conveniently installed and replaced on a host structure. First, the electromechanical impedance of the proposed PZT interface is theoretically derived. The proof-of-concept of the proposed PZT interface for impedance monitoring is then shown by finite element modelling. Afterwards, a lab-scaled experiment is conducted on an anchoring system to demonstrate the practical application feasibility of the proposed technique. The obtained results show that the proposed technique can produce impedance responses that are highly sensitive to the prestress force. The performance of the proposed model for impedance-based prestress force monitoring is found to be comparable with the previous techniques (the washer-type mount and the two-point mount). Due to its advantage of simple design, the newly designed PZT interface is promising for the future development of the impedance-based anchor force monitoring systems in practice.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.