Analytical Study on the Random Seismic Responses of an Asymmetrical Suspension Structure

An asymmetrical suspension structure, without vertical column support and without supplying the flexibility of spatial arrangement, is more sensitive to ground movement. The structural responses of an asymmetrical suspension structure subjected to Clough–Penzien spectrum excitation were analytically investigated in this study. First, the governing equation was decoupled into an independent state equation in generalized coordinates through the real mode decomposition method and by creatively combining it with finite element methods to acquire modal coefficients. Through the pseudo excitation method (PEM), the frequent domain solution of the dynamic response was acquired, and its power spectrum density function was then quadratically decomposed to obtain its corresponding 0–2-order spectral moments. A practical case study was performed to verify the high accuracy and computational efficiency of the proposed closed-form solution comparative to the traditional PEM. Finally, an extended analysis of the effect of the suspended span and comparisons to a normal framed structure and symmetrical suspension structures were carried out. The analysis results indicate that the larger suspended span could consume more seismic energy and result in smaller horizontal displacement and acceleration. Moreover, the comparison results also point out that the existence of the suspension part showed better seismic energy dissipation capacity compared to the normal framed structure, and two symmetrical suspension parts also performed better than a single asymmetrical part in seismic energy dissipation.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.