0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Analysis of the Water/Cement/Bentonite Ratio Used for Construction of Cut-Off Walls

Autor(en): ORCID
ORCID




ORCID
ORCID

ORCID
ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 12, v. 13
Seite(n): 2922
DOI: 10.3390/buildings13122922
Abstrakt:

In recent years, because of the continuous expansion of urban areas, an increased necessity to isolate historically polluted sites by means of artificial, flexible, low-permeability barriers has emerged. Moreover, due to cost and efficiency considerations, various combinations of materials that fulfill the previously stated requirements have been proposed. On the basis of a literature review, this paper analyses the relationships between water, cement, and bentonite, and the physical and mechanical properties of the resulting material created in combination with standard sand introduced in the mixture using a ratio of 2:1 with respect to the solid part of the mixture (cement and bentonite). The quantity of standard sand was established following previous research conducted by the authors. The relation between water, cement, and bentonite is analyzed through properties such as viscosity, permeability, and undrained cohesion, and the representation of mixtures and their corresponding parameters was carried out using a ternary diagram. This paper provides a graphical approach to finding the optimum water/bentonite/cement mixture required for barrier design, taking into account permeability, undrained cohesion, and mixture viscosity.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10753655
  • Veröffentlicht am:
    14.01.2024
  • Geändert am:
    07.02.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine