Analysis of Structural Characteristics of Underground Cavern Group by Simulating All Cavern Excavation

The traditional Three-dimensional (3D) model for stability analysis of a large underground cavern group only includes the main powerhouse, the main transformer chamber, the tailrace surge tank, the main electrical wire hall, and part of the diversion tunnel and tailwater tunnel. Other caverns excavation are not taken into consideration, which is inconsistent with the actual project. In this study, a 3D Finite Element Method (FEM) model, including all the cavities, and a 3D simplified model containing only part of the cavities were established based on the actual underground cavern group project. We study the structural characteristics of the cavern group during excavation via 3D nonlinear FEM. At the same time, three numerical calculation schemes are designed for comparison. The results show that the simulated distributions of the stress field, deformation field, and plastic zone of the two numerical models are similar, but the magnitudes of the 3D FEM model, which considers all caverns are generally higher than the simplified model. The difference between the two simulated horizontal displacements of the main powerhouse reaches 53.72%. Therefore, from the perspective of engineering safety and actual construction, it is advisable to adopt the 3D FEM model, including all the cavities, when conducting a simulation analysis of the underground cavern group.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.