Analysis of Necessity and Feasibility for Ground Improvement in Warm and Ice-Rich Permafrost Regions

Characterized by low bearing capacity and high compressibility, warm and ice-rich frozen soil is a kind of problematic soil, which makes the original frozen ground formed by of that unreliable to meet the stability requirements of engineering infrastructures and foundations in permafrost regions. With the design and construction of major projects along the Qinghai-Tibet Engineering Corridor (QTEC), such as expressway and airport runway, it is a great challenge to favor the stability of overlying structures by formulating the proper engineering design principles and developing the valid engineering supporting techniques. The investigations carried out in recent years indicated that warm and ice-rich permafrost foundations were widespread, climate warming was significant, and the stability of existing engineering structures was poor, along the QTEC. When the warm and ice-rich frozen ground is used as the foundation soil, the implementation of ground improvement is an alternative measure to enhance the bearing capacity of foundation soil and eliminate the settlement of structures during operation, in order to guarantee the long-term stability of the structures. Based on the key factors determining the physicomechanical properties of frozen soil, an innovative idea of stabilizing the warm and ice-rich frozen soil based on chemical stabilization is proposed in this study, and then, an in situ ground improvement technique is introduced. This study intends to explore the feasibility of ground improvement in warm and ice-rich permafrost regions along the QTEC based on in situ chemical stabilization and provide the technical support and scientific reference to prevent and mitigate the hazards in the construction of major projects in the future.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.