Analysis of Multi-Storied Building in Different Seismic Zones using STAAD Pro

The aim of this paper is to analysis of a multi-stored building [G+5] using STAAD Pro by considering different seismic zones. The analysis of a multi-stored building [G+5] initially for all type of loads (Seismic load, Dead load, Live load and Wind load) and possible load combinations are performed as per Indian codes. The seismic analysis is done under different zones which are Zone-II, Zone-III, Zone-IV, Zone-V and also zone factor values are considered as per IS 1893-2002 (Part-1). By considering each zone factor value and loads including self-weight, member weight, floor weight in seismic load, dead load, live load and wind loads the structure may affect. Also observing the Shear force, bending moment and deflection values for the whole building in different Seismic zones by using STAAD Pro. In analysing the whole structure considering all parameters like all loads (live load, dead load, seismic loads wind load) and type of structure, damping ratio, importance factor, response reduction factor, zone factor/different cities under different zones plays major role in building how it reacts to it and by shear force, bending moment, deflection values states that it is safe in particular zones or all the factors must be taken in consideration to imply the building is safe or not.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 3.0 (CC-BY 3.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.