0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Analysis of fracture processes in reinforced concrete beams without stirrups

Autor(en):
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Frattura ed Integrità Strutturale, , n. 57, v. 15
Seite(n): 321-330
DOI: 10.3221/igf-esis.57.23
Abstrakt:

The analysis of fracture processes which led to shear failure in reinforced concrete beams without transverse reinforcement was performed on the basis of test results from the author’s own experimental investigation and numerical simulations. The variable parameters during the experiment were a beam’s length and a shear span. It was observed that the character of failure in the beams depended on the beam’s length and the span-to-depth ratio. In slender beams characterized by the shear span-to-depth ratio 3.4 and 4.1, the formation of the critical diagonal crack caused a brittle, sudden failure and the shear capacity was low. In short beams, when the shear span-to-depth ratio was 1.8 and 2.3, the failure process had a more stable character with a slow developing of inclined cracks and the significantly higher load capacity was reached. The activation of various shear transfer mechanisms was examined with regard to the slenderness of the member and the transition between a beam action which took place in slender beams to an arch action which predominated in short beams was described.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.3221/igf-esis.57.23.
  • Über diese
    Datenseite
  • Reference-ID
    10614289
  • Veröffentlicht am:
    08.07.2021
  • Geändert am:
    08.07.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine