Analysis of Axial Compression Performance of Concrete Stub Column with CRB600H Stirrups

The CRB600H reinforcement is a new type of cold-rolled ribbed steel bar, which has the advantages of green and low carbon, stable quality, saving precious metal resources and so on. In order to study the axial compression performance of short concrete columns with CRB600H stirrups, the finite element analysis model of high-strength reinforced concrete stub columns was established by using ABAQUS, and the accuracy of the finite element model was verified by literature experiments. The effects of stirrup construction (Type A, B and C), stirrup spacing and concrete strength on the axial compressive bearing capacity and ductility of concrete columns with CRB600H stirrups were analyzed and compared with HRB400 stirrups columns. The results showed that the peak bearing capacity of the specimens with CRB600H stirrups was similar to that with HRB400 stirrups, and the ductility of the specimens was improved with CRB600H stirrup. Compared with the type A stirrup and type C stirrup, the type B stirrup had the best concrete restraining effect, and the ductility and peak bearing capacity of the specimens were higher. With a decrease in the stirrup spacing, the ductility and peak bearing capacity of the specimens increased. With an increase in concrete strength, the peak bearing capacity increases, but the ductility decreases. Through parameter analysis, a formula for calculating the axial bearing capacity of 600 MPa high-strength stirrup concrete stub columns based on the effective confinement index (keλt) was proposed. It is suggested that the equivalent volume of a HRB400 stirrup can be replaced by a CRB600H stirrup in the actual project. At the same time, when the high-strength stirrup was used, the restraining effect of the stirrup on concrete should be considered in the calculation of the axial compression bearing capacity.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.