Ammonia in Fly Ashes from Flue Gas Denitrification Process and its Impact on the Properties of Cement Composites

The paper presents the results of research on the properties of fly ashes from the process of flue gas denitrification by selective non-catalytic reduction (SNCR), consisting of dosing urea into the coal combustion chamber. The research was carried out on two types of fly ash: Silica fly ash from flue gas denitrification and ash from a traditional boiler without the flue gas denitrification process. The scope of comparative studies included physicochemical and structural features of ashes, as well as slurries and mortars with the addition of ashes. Fly ash from denitrification, whose ammonia content at the time of sampling was 75 mg/kg at the maximum, was examined. Our own research has shown that fly ash from flue gas denitrification is characterized by a higher value of losses on ignition and ammonia content in comparison to ashes without denitrification. It was shown that the ammonia content in the analyzed range does not limit the use of fly ash as an additive to cement and concrete.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.