^ Additive Manufacturing Applications for Industry 4.0: A Systematic Critical Review | Structurae
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke


Additive Manufacturing Applications for Industry 4.0: A Systematic Critical Review


Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 12, v. 10
Seite(n): 231
DOI: 10.3390/buildings10120231

Additive manufacturing, including 3D printing (3DP), is one of the critical pillars of Industry 4.0 and the next construction revolution. Several countries, including China, have utilized 3DP on larger scales or real projects. However, reviews of the lessons learned from previous large-sized practices of 3DP utilization are scarce. This paper presents a few practical applications of implementing 3DP over the past decade and suggests a direction for future research work. Recent publications on 3DP practices are systematically reviewed using an interpretivist philosophical lens, and more specifically, the nozzle characteristics are focused upon. The Scopus and China National Knowledge Infrastructure (CNKI) journal databases are utilized, resulting in the examination of 54 English and 62 Chinese papers. The selected practices from Mainland China, Hong Kong, Taiwan and Macao are considered for this review. A content critical review approach is adopted, and the identified papers are critically reviewed. These papers reported key challenges and advantages from their reported practices, such as limitations in aggregate sizes, nozzle sizes, standards, post-occupancy satisfaction, final product quality, productivity challenges and other associated risks. The paper reports upon prominent limitations and signposts directions for future investigations.

Copyright: © 2020 by the authors; licensee MDPI, Basel, Switzerland.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
  • Reference-ID
  • Veröffentlicht am:
  • Geändert am: