Accuracy of the CM Carbide Method When Testing Counter-Floors Used in the Construction Industry
Autor(en): |
Maciej Trochonowicz
(Lublin University of Technology , Lublin Poland)
Bartosz Szostak (Lublin University of Technology , Lublin Poland) Marek Lackorzyński (Lublin University of Technology , Lublin Poland) |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Civil and Environmental Engineering Reports, März 2020, n. 1, v. 30 |
Seite(n): | 64-73 |
DOI: | 10.2478/ceer-2020-0006 |
Abstrakt: |
Special requirements are placed on finishing materials and foundations for these materials. The technical datasheets for wooden floors contain detailed moisture guidelines regarding counter-floors for these materials. To check the moisture level, the carbide method (CM method) is recommended by manufacturers and many specialists. The authors of the paper performed moisture tests for various counter-floors (anhydrite and cement jointless floors, cement-sand mixtures) using the direct gravimetric (laboratory) method and the carbide method. Test results were collected and analyzed. |
- Über diese
Datenseite - Reference-ID
10705139 - Veröffentlicht am:
19.02.2023 - Geändert am:
19.02.2023