Accounting for the Spatial Variability of Seismic Motion in the Pushover Analysis of Regular and Irregular RC Buildings in the New Italian Building Code

Pushover analysis is the main methodology adopted in practice-oriented applications for investigating the non-linear response of reinforced concrete (RC) buildings; it is applicable for both new and existing buildings. It is well-known that several limitations characterize this methodology and the scientific literature proposes several non-conventional approaches to provide results comparable to those of the more efficient nonlinear dynamic analysis. In most recent seismic guidelines, some improvements have been introduced, in order to overcome the main drawbacks of conventional pushover methods, in view of practice-oriented applications. In particular, new prescriptions are related to the load profiles and the choice of control nodes, aspects that lead to different results in terms of capacity curves and in the safety assessment. Another relevant point is represented by the spatial combination of effects, which suggests the opportunity of executing simultaneous bi-directional pushover analyses. The aim of this paper is to investigate the effects of the new trends followed by some guidelines about pushover analysis, such as the recent 2018 release of the Italian Building Code. In particular, after a general test of the new conventional procedure for the case of RC buildings, a set of case studies has been generated, consisting of three-dimensional RC-archetypes specifically designed and investigated in order to cover the more significant scenarios. The results in terms of global and local performances are processed and critically analyzed, with the aim of appraising the main differences between the traditional and new approaches and identifying the effectiveness and of the actual improvements achieved.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.