Xiaojun Zhou 
- (2024): Experimental and numerical investigations on tensile failure mechanism and load-bearing capacity of expansion anchors under pull-through failure mode in HPSFRC. In: Engineering Structures, v. 315 (September 2024).
- (2024): Matching relationship study between steel ratio and core concrete strength in UHSCFST stub columns. In: Journal of Constructional Steel Research, v. 219 (August 2024).
- (2024): Effect of foaming characteristics of air entrained agents on mechanical properties and pore structures of cement-based materials in plateau mountainous regions. In: Journal of Building Engineering, v. 91 (August 2024).
- (2024): Effect of sewage sludge ash on mechanical properties, drying shrinkage and high-temperature resistance of cement mortar. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): Experimental study on the degradation of mechanical properties of H-shaped steel columns in the chloride salt environment. In: Journal of Constructional Steel Research, v. 217 (Juni 2024).
- (2023): High-performance formaldehyde prediction for indoor air quality assessment using time series deep learning. In: Building Simulation, v. 17, n. 3 (Dezember 2023).
- (2023): The development of concrete filled steel tube with enhanced performance via the use of expansive ultra high performance concrete. In: Journal of Building Engineering, v. 79 (November 2023).
- (2023): Failure mechanism of the deep-buried metro tunnel in mixed strata: Physical model test and numerical investigation. In: Tunnelling and Underground Space Technology, v. 139 (September 2023).
- (2023): Effect of dust formation on the fate of indoor phthalates: Model analysis. In: Building and Environment, v. 229 (Februar 2023).
- (2023): Accelerated sulfate corrosion of limestone powder cement-based materials in a high geothermal environment by electrical pulse. In: Construction and Building Materials, v. 369 (März 2023).
- (2022): A new method for determining the formaldehyde emission characteristic parameters of building materials: Single airtight emission method. In: Building and Environment, v. 207 (Januar 2022).
- (2021): Direct and non-direct transfer of phthalate esters from indoor sources to settled dust: Model analysis. In: Building and Environment, v. 202 (September 2021).
- (2021): Hierarchical parameter optimization based support vector regression for power load forecasting. In: Sustainable Cities and Society, v. 71 (August 2021).
- (2021): Experimental study on the tunnel temperature distribution under the coupling effect of train blocking and fire inside the carriage. In: Tunnelling and Underground Space Technology, v. 112 (Juni 2021).
- (2020): Mathematical model for characterizing the full process of volatile organic compound emissions from paint film coating on porous substrates. In: Building and Environment, v. 182 (September 2020).
- (2020): Effects of indoor thermal exposure on human dynamic thermal adaptation process. In: Building and Environment, v. 179 (Juli 2020).
- (2020): Field investigation on phthalates in settled dust from five different surfaces in residential apartments. In: Building and Environment, v. 177 (Juni 2020).
- (2020): Bonding behavior and its affecting factors between basic oxygen furnace slag and asphalt. In: Construction and Building Materials, v. 253 (August 2020).
- (2020): Design of Groundwater Extraction in Open Cut Foundation Pit and Simplified Calculation of Ground Subsidence due to Dewatering in Sandy Pebble Soil Strata. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2020): Investigation of the physic-chemical properties and toxic potential of Basic Oxygen Furnace Slag (BOF) in asphalt pavement constructed after 15 years. In: Construction and Building Materials, v. 238 (März 2020).
- (2018): Investigation of the capillary rise in cement-based materials by using electrical resistivity measurement. In: Construction and Building Materials, v. 173 (Juni 2018).
- (2020): A novel model for predicting the semivolatile organic compound partition coefficient of multicomponent airborne particles. In: Building and Environment, v. 167 (Januar 2020).
- (2019): Modelling and testing of VOC source suppression effect of building materials modified with adsorbents. In: Building and Environment, v. 154 (Mai 2019).
- (2019): A novel method to determine the formaldehyde emission characteristic parameters of building materials at multiple temperatures. In: Building and Environment, v. 149 (Februar 2019).
- (2018): Alternately airtight/ventilated emission method: A universal experimental method for determining the VOC emission characteristic parameters of building materials. In: Building and Environment, v. 130 (Februar 2018).
- (2020): Investigation of physicochemical and rheological properties of SARA components separated from bitumen. In: Construction and Building Materials, v. 235 (Februar 2020).
- (2019): Mechanism of collapse failure and analysis of yield collapse resistance of casing under combined load. In: Engineering Structures, v. 191 (Juli 2019).
- (2017): A new model for the electrical conductivity of cement-based material by considering pore size distribution. In: Magazine of Concrete Research, v. 69, n. 20 (Oktober 2017).
- (2016): Displacement characteristics of high-speed railway tunnel construction in loess ground by using multi-step excavation method. In: Tunnelling and Underground Space Technology, v. 51 (Januar 2016).
- (2018): The Design and compilation of specifications for a modular-prefabricated high-rise steel frame structure with diagonal braces. Part I: Integral structural design. In: The Structural Design of Tall and Special Buildings, v. 27, n. 2 (10 Februar 2018).
Structurae kooperiert mit
