Jing Zhou 
- (2024): Feasibility Study of Earthquake-Induced Damage Assessment for Structures by Utilizing Images from Surveillance Cameras. In: Structural Control and Health Monitoring, v. 2024 (Januar 2024).
- (2024): Improving the mechanical performance of concrete by graphene nanoplatelets (GNP) enrichment in the interfacial transition zone (ITZ). In: Journal of Building Engineering, v. 90 (August 2024).
- (2023): Deterioration Performance of Recycled Aggregate Pervious Concrete under Freezing–Thawing Cycle and Chloride Environment. In: Buildings, v. 13, n. 3 (26 Februar 2023).
- (2022): Feasibility study of percussion–acoustic‐based void identification for underwater concrete. In: Structural Control and Health Monitoring, v. 29, n. 11 (September 2022).
- (2017): Experimental Research on Thermal Performance Differences of Building Envelopes in Multiple Heating Operation Conditions. In: Procedia Engineering, v. 205 ( 2017).
- (2017): Experimental Study on Thermal Performance Improvement of Building Envelopes Integrated with Phase Change Materials in an Air-conditioned Room. In: Procedia Engineering, v. 205 ( 2017).
- (2018): Impact of wind loads on the resistance capacity of the transmission tower subjected to ground surface deformations. In: Thin-Walled Structures, v. 131 (Oktober 2018).
- (2015): Experimental investigations on detecting lateral buckling for subsea pipelines with distributed fiber optic sensors. In: Smart Structures and Systems, v. 15, n. 2 (Februar 2015).
- (2013): Dimethyl Sulfoxide Separating Waste Printed Circuit Boards by Dissolving Polymer Materials. In: Journal of Environmental Engineering (ASCE), v. 139, n. 8 (August 2013).
- (2018): Experimental study on thermal performance improvement of building envelopes by integrating with phase change material in an intermittently heated room. In: Sustainable Cities and Society, v. 38 (April 2018).
- (2021): Compressive behaviour of stone dust concrete composite columns confined with bamboo plywood and thin-walled steel-tube systems. In: Journal of Building Engineering, v. 38 (Juni 2021).
- (2019): Heat storage and release characteristics of composite phase change wall under different intermittent heating conditions. In: Science and Technology for the Built Environment, v. 25, n. 3 (März 2019).
- (2018): Energy-saving analysis of a case data center with a pump-driven loop heat pipe system in different climate regions in China. In: Energy and Buildings, v. 169 (Juni 2018).
- (2020): Experimental study of cyclic frosting and defrosting on microchannel heat exchangers with different coatings. In: Energy and Buildings, v. 226 (November 2020).
- (2020): Elastomeric microfluidic valve for active resin flow control within composite structure. In: Composite Structures, v. 254 (Dezember 2020).
- (2020): Detection of post-earthquake damage inside a concrete arch dam using the electromechanical impedance method. In: Journal of Civil Structural Health Monitoring, v. 11, n. 1 (September 2020).
- (2021): Cyclic behavior of concrete‐encased high‐strength concrete‐filled steel tube composite walls: An experiment. In: Structural Concrete, v. 22, n. 2 (April 2021).
- (2020): Cyclic Experiments on Concrete-encased CFST wall-RC Coupling Beam Joints with Non-through-core Anchorages. In: Journal of Earthquake Engineering, v. 26, n. 3 (Juni 2020).
- (2019): Concession Model for Fair Distribution of Benefits and Risks in Build-operate-transfer Road Projects. In: Journal of Civil Engineering and Management, v. 25, n. 3 (Juni 2019).
- (2014): Curvature ductility of columns and structural displacement ductility in RC frame structures subjected to ground motions. In: Soil Dynamics and Earthquake Engineering, v. 63 (August 2014).
- (2014): Influence of Ground Motion Duration on Damping Reduction Factor. In: Journal of Earthquake Engineering, v. 18, n. 5 ( 2014).
- (2015): Least Favorable Probability of Failure for 5- and 10-story RC Frame Structures with Vertical Irregularities. In: Journal of Earthquake Engineering, v. 19, n. 7 ( 2015).
- (2009): An extraction of the natural frequencies and mode shapes of marine risers by the method of differential transformation. In: Computers & Structures, v. 87, n. 21-22 (November 2009).
- (2012): A Kriging-based hybrid optimization algorithm for slope reliability analysis. In: Structural Safety, v. 34 (Januar 2012).
- (2013): Importance and ranking evaluation of delay factors for development construction projects in Benin. In: KSCE Journal of Civil Engineering, v. 17, n. 6 (August 2013).
- (2017): Compression performance of thin-walled square steel tube/bamboo plywood composite hollow columns with binding bars. In: Advances in Structural Engineering, v. 21, n. 3 (Oktober 2017).
- (2017): Crack detection in pipelines using multiple electromechanical impedance sensors. In: Smart Materials and Structures, v. 26, n. 10 (Oktober 2017).
- (2007): Experimental and numerical study on tuned liquid dampers for controlling earthquake response of jacket offshore platform. In: Marine Structures, v. 20, n. 4 (Oktober 2007).
- (2016): Failure pressure analysis of corroded moderate-to-high strength pipelines. In: China Ocean Engineering, v. 30, n. 1 (Januar 2016).
- (2017): Experimental investigations on seismic damage monitoring of concrete dams using distributed lead zirconate titanate sensor network. In: Advances in Structural Engineering, v. 20, n. 2 (Januar 2017).
Structurae kooperiert mit
