Peng Zhao 
- (2024): The effect of unidirectional airflow on health care–associated infections in burn intensive care unit: An interrupted time-series analysis. In: Energy and Buildings, v. 307 (März 2024).
- (2023): Experimental Study on Dynamic Characteristics of Saturated Soft Clay with Sand Interlayer under Unidirectional and Bidirectional Vibration. In: Buildings, v. 13, n. 10 (10 Oktober 2023).
- (2023): Degradation Mechanism of Nonaqueous Reactive Polymer Grouting Materials under Chemical Corrosion Environment. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 10 (Oktober 2023).
- (2023): Effect of water molecular behavior on adhesion properties of asphalt-aggregate interface. In: Construction and Building Materials, v. 402 (Oktober 2023).
- (2022): Experimental Studies for Shear and Multi-Impact Resistance Performance of Sand–Geofoam Material. In: Buildings, v. 12, n. 5 (24 April 2022).
- (2022): A cleaner polyurethane elastomer grouting material with high hardening strain for the fundamental rehabilitation: The comprehensive mechanical properties study. In: Construction and Building Materials, v. 318 (Februar 2022).
- (2022): Experimental investigation on ceiling temperature characteristics induced by weak and strong fire plumes in tunnel fires equipped with two-point extraction ventilation using smoke extraction channel. In: Tunnelling and Underground Space Technology, v. 124 (Juni 2022).
- (2021): Investigation on calcination mechanism of tricalcium silicate by a coupled electric-thermal field. In: Construction and Building Materials, v. 313 (Dezember 2021).
- (2021): An in-situ experimental investigate of thermo-mechanical behavior of a large diameter over length energy pile. In: Energy and Buildings, v. 252 (Dezember 2021).
- (2021): Automatic segmentation, inpainting, and classification of defective patterns on ancient architecture using multiple deep learning algorithms. In: Structural Control and Health Monitoring, v. 28, n. 7 (2 Juni 2021).
- (2021): Effects of Nano-Silica Particle Size on Fresh State Properties of Cement Paste. In: KSCE Journal of Civil Engineering, v. 25, n. 7 (Mai 2021).
- (2021): Impact of sustained load on damage characteristics of reinforced concrete beams under the combined action of salt freeze-thaw cycles and corrosion. In: Construction and Building Materials, v. 273 (März 2021).
- (2020): An Experimental Study on the Reinforcement of Silt with Permeable Polyurethane by Penetration Grouting. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2013): Evaluation of commercial building HVAC systems as frequency regulation providers. In: Energy and Buildings, v. 67 (Dezember 2013).
- (2015): Dynamic frequency regulation resources of commercial buildings through combined building system resources using a supervisory control methodology. In: Energy and Buildings, v. 86 (Januar 2015).
- (2020): Effect of heat release rate and exhaust vent settings on the occurrence of plug-holing during tunnel fires with two-point extraction ventilation. In: Tunnelling and Underground Space Technology, v. 106 (Dezember 2020).
- (2013): Green Building Technology of Regional Suitability Evaluation System Research and Case Study. In: Applied Mechanics and Materials, v. 357-360 (August 2013).
- (2020): Axial compressive experiments and structural behaviour estimation of CFS composite walls sprayed with LPM. In: Journal of Building Engineering, v. 30 (Juli 2020).
- (2018): Damage Classification for Masonry Historic Structures Using Convolutional Neural Networks Based on Still Images. In: Computer-Aided Civil and Infrastructure Engineering, v. 33, n. 12 (November 2018).
- (2020): Dynamic Behavior of Super High-Rise Building: Deployment of Smart Monitoring System and Analysis. In: Journal of Structural Engineering (ASCE), v. 146, n. 4 (April 2020).
- (2019): CNN-based statistics and location estimation of missing components in routine inspection of historic buildings. In: Journal of Cultural Heritage, v. 38 (Juli 2019).
- (2020): Autonomous damage segmentation and measurement of glazed tiles in historic buildings via deep learning. In: Computer-Aided Civil and Infrastructure Engineering, v. 35, n. 3 (5 Februar 2020).
- (2019): Improving chloride ion penetration resistance of cement mortar by strong base anion exchange resin. In: Construction and Building Materials, v. 226 (November 2019).
- (2019): Fabrication of graphene/polyimide nanocomposite-based hair-like airflow sensor via direct inkjet printing and electrical breakdown. In: Smart Materials and Structures, v. 28, n. 6 (Juni 2019).
- (2019): Influence of sustained load on corrosion characteristics of reinforced concrete beams under galvanostatic accelerated corrosion. In: Construction and Building Materials, v. 215 (August 2019).
- (2019): Conservation of disappearing traditional manufacturing process for Chinese grey brick: Field survey and laboratory study. In: Construction and Building Materials, v. 212 (Juli 2019).
- (2019): Automatic damage detection of historic masonry buildings based on mobile deep learning. In: Automation in Construction, v. 103 (Juli 2019).
- (2018): Experimental study of rock-sheds constructed with PE fibres and composite cushion against rockfall impacts. In: Engineering Structures, v. 177 (Dezember 2018).
- (2018): Influence of stirrup arrangements on the corrosion characteristics of reinforced concrete members. In: Construction and Building Materials, v. 192 (Dezember 2018).
- (2018): Improvement of mechanical properties and chloride ion penetration resistance of cement pastes with the addition of pre-dispersed silica fume. In: Construction and Building Materials, v. 182 (September 2018).
Structurae kooperiert mit
