Jian Zhao 
- (2024): Investigation into the long-term alkali resistance of basalt fibers. In: Journal of Building Engineering, v. 98 (Dezember 2024).
- (2025): A modular automated modelling framework for cut-and-cover excavations in mixed ground conditions. In: Tunnelling and Underground Space Technology, v. 158 (April 2025).
- (2024): Machine learning-assisted characterization of the thermal conductivity of cement-based grouts for borehole heat exchangers. In: Construction and Building Materials, v. 449 (Oktober 2024).
- (2024): Investigation of the static constitutive relationship of rubberized self-compacting concrete after high-temperature exposure. In: Construction and Building Materials, v. 440 (August 2024).
- (2024): Experimental study on plastic hinge relocation for precast concrete beam-column joints using ultra-high performance concrete U-shell beam. In: Structures, v. 67 (September 2024).
- (2024): Numerical and Preliminary In Situ Investigation on Roadway Excavation Using Static Expansion Mechanical Fracturing. In: Advances in Civil Engineering, v. 2024 (Januar 2024).
- (2024): Nonlinear dynamic morphing of conical bistable dielectric elastomer actuator. In: Smart Materials and Structures, v. 33, n. 3 (2 Februar 2024).
- (2023): Influence of industrial by-product sulfur powder on properties of cement-based composites for sustainable infrastructures. In: Construction and Building Materials, v. 367 (Februar 2023).
- (2022): Influence of tartaric acid dosage on the early-age and long-term properties of calcium sulfoaluminate belite cement composites. In: Construction and Building Materials, v. 356 (November 2022).
- (2022): Experimental Study of the Factors Influencing the Performance of the Bonding Interface between Epoxy Asphalt Concrete Pavement and a Steel Bridge Deck. In: Buildings, v. 12, n. 4 (11 April 2022).
- (2022): Modeling Crushed Concrete Depth and Its Impact on Anchors Shear Capacities. In: Journal of Structural Engineering (ASCE), v. 148, n. 5 (Mai 2022).
- (2021): Experimental study on flexural behaviour of reinforced reactive powder concrete pole. In: Construction and Building Materials, v. 312 (Dezember 2021).
- (2021): Experiments of cast-in anchors under simulated seismic loads. In: Engineering Structures, v. 248 (Dezember 2021).
- (2021): Monitoring, modelling and prediction of segmental lining deformation and ground settlement of an EPB tunnel in different soils. In: Tunnelling and Underground Space Technology, v. 113 (Juli 2021).
- (2021): Novel adhesive anchoring system through engineered adhesive-concrete interface. In: Structures, v. 33 (Oktober 2021).
- (2012): Modeling of Rheological Deformation of Inhomogeneous Rock and Associated Time-Dependent Response of Tunnels. In: International Journal of Geomechanics, v. 12, n. 2 (April 2012).
- (2016): Numerical Analysis of the Effect of Surcharge on the Mechanical Behavior of Geocell Reinforced Retaining Wall. In: Stavební obzor - Civil Engineering Journal, v. 25, n. 4 ( 2016).
- (2021): Failure analysis of bio-inspired corrugated sandwich structures fabricated by laser powder bed fusion under three-point bending. In: Composite Structures, v. 263 (Mai 2021).
- (2011): Least-work solutions of flange normal stresses in thin-walled flexural members with high-order polynomial. In: Engineering Structures, v. 33, n. 10 (Oktober 2011).
- (2020): Experimental study on compressive properties of SFRC under high strain rate with different fiber content and aspect ratio. In: Construction and Building Materials, v. 261 (November 2020).
- (2012): Nonlinear modeling of flat-plate structures using grid beam elements. In: Computers and Concrete, v. 10, n. 5 (November 2012).
- (2005): Nonlinear System Modeling and Velocity Feedback Compensation for Effective Force Testing. In: Journal of Engineering Mechanics (ASCE), v. 131, n. 3 (März 2005).
- (2011): Investigation of strain-sensing materials based on EM surface wave propagation for steel bridge health monitoring. In: Construction and Building Materials, v. 25, n. 7 (Juli 2011).
- (2002): Modeling of Tunnel Excavation Using a Hybrid DEM/BEM Method. In: Computer-Aided Civil and Infrastructure Engineering, v. 17, n. 5 (September 2002).
- (2016): Finite element model methodology for asphalt-coated anchor used in underground main powerhouse anchored-on-rock crane girder. In: KSCE Journal of Civil Engineering, v. 21, n. 6 (Dezember 2016).
- (2005): Numerical modeling of the effects of joint orientation on rock fragmentation by TBM cutters. In: Tunnelling and Underground Space Technology, v. 20, n. 2 (März 2005).
- (2012): Modeling inelastic shear lag in steel box beams. In: Engineering Structures, v. 41 (August 2012).
- (2018): Fiber Reinforced Polymer as External Reinforcement for Single Cast-in Anchors in Plastic Hinge Zones. In: Structures, v. 13 (Februar 2018).
- (2017): Impact of Heavy Vehicles on the Durability of Concrete Bridge Decks. In: Journal of Bridge Engineering (ASCE), v. 22, n. 10 (Oktober 2017).
- (2016): introduction to connectivity concept and an example of physical connectivity evaluation for underground space. In: Tunnelling and Underground Space Technology, v. 55 (Mai 2016).
Structurae kooperiert mit
