Zhigang Zhang 
- (2024): On use of polyvinylpyrrolidone to modify polyethylene fibers for improving tensile properties of high strength ECC. In: Construction and Building Materials, v. 417 (Februar 2024).
- (2023): Mechanical and self-healing properties of calcium-sulfoaluminate-cement-based engineered cementitious composites (ECC). In: Journal of Building Engineering, v. 77 (Oktober 2023).
- (2023): 3D printing concrete structures: State of the art, challenges, and opportunities. In: Construction and Building Materials, v. 405 (November 2023).
- (2024): Graphene Oxide–Pretreated Waste Medical Mask Microfiber-Reinforced Cement Composites: Frost Damage Modeling and Chloride Migration. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (Januar 2024).
- (2023): Mechanical properties of sustainable high strength ECC with substitution of cement by limestone powder. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).
- (2023): Flexural behavior of reinforced concrete (RC) beams strengthened with carbon fiber reinforced polymer (CFRP) and ECC. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).
- (2020): Eco-friendly high strength, high ductility engineered cementitious composites (ECC) with substitution of fly ash by rice husk ash. In: Cement and Concrete Research, v. 137 (November 2020).
- (2023): Mechanical performance of high-strength engineering cementitious composites (ECC) with hybriding PE and steel fibers. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2023): Flexural behaviour of high strength engineered cementitious composites (ECC)-reinforced concrete composite beams. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2023): Exploring the design risks affecting operation performance of green commercial buildings in China. In: Journal of Building Engineering, v. 64 (April 2023).
- (2022): Degradation of Reinforced Concrete Beams Subjected to Sustained Loading and Multi-Environmental Factors. In: Buildings, v. 12, n. 9 (16 September 2022).
- (2022): Advanced Concrete Technology and Its Structural Applications. In: Advances in Civil Engineering, v. 2022 (Januar 2022).
- (2021): Flexural Performance of Emulsified-Asphalt-Modified ECC for Expansion Joint Use. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2022): Hysteretic behavior of composite bridge columns with plastic hinge enhanced by engineered cementitious composite jacket for seismic resistance. In: Engineering Structures, v. 251 (Januar 2022).
- (2019): Heat transfer performance of the Trombe wall implanted with heat pipes during daytime in winter. In: Science and Technology for the Built Environment, v. 25, n. 7 (2 August 2019).
- (2019): Dynamic heat transfer analysis of the wall implanted with heat pipes in summer. In: Advances in Building Energy Research, v. 14, n. 4 (September 2019).
- (2020): Effect of sub-elevated temperature on mechanical properties of ECC with different fly ash contents. In: Construction and Building Materials, v. 262 (November 2020).
- (2014): A new type of passive solar energy utilization technology—The wall implanted with heat pipes. In: Energy and Buildings, v. 84 (Dezember 2014).
- (2015): The applicability of the wall implanted with heat pipes in winter of China. In: Energy and Buildings, v. 104 (Oktober 2015).
- (2018): Dynamic heat transfer characteristics of wall implanted with heat pipes in summer. In: Energy and Buildings, v. 170 (Juli 2018).
- (2020): Neural network models to predict explosive spalling of PP fiber reinforced concrete under heating. In: Journal of Building Engineering, v. 32 (November 2020).
- (2018): Matrix tailoring of Engineered Cementitious Composites (ECC) with non-oil-coated, low tensile strength PVA fiber. In: Construction and Building Materials, v. 161 (Februar 2018).
- (2019): A Comparative Life Cycle Assessment (LCA) of Warm Mix Asphalt (WMA) and Hot Mix Asphalt (HMA) Pavement: A Case Study in China. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Matrix design of light weight, high strength, high ductility ECC. In: Construction and Building Materials, v. 210 (Juni 2019).
- (2014): Investigating mechanical properties and self-healing behavior of micro-cracked ECC with different volume of fly ash. In: Construction and Building Materials, v. 52 (Februar 2014).
- (2014): Effect of self-healing on water permeability and mechanical property of Medium-Early-Strength Engineered Cementitious Composites. In: Construction and Building Materials, v. 68 (Oktober 2014).
- (2015): Mechanical performance of ECC with high-volume fly ash after sub-elevated temperatures. In: Construction and Building Materials, v. 99 (November 2015).
- (2019): Influence of bacterial incorporation on mechanical properties of engineered cementitious composites (ECC). In: Construction and Building Materials, v. 196 (Januar 2019).
- (2015): Investigation on Properties of ECC Incorporating Crumb Rubber of Different Sizes. In: Journal of Advanced Concrete Technology, v. 13, n. 5 ( 2015).
- (2018): Investigation on the adhesive characteristics of Engineered Cementitious Composites (ECC) to steel bridge deck. In: Construction and Building Materials, v. 191 (Dezember 2018).
Structurae kooperiert mit
