Yu Zhang 
- (2024): Quantitative surface quality evaluation for 3D-printed concrete with coarse aggregate through 3D scanning. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2023): Recycling of Aluminosilicate-Based Solid Wastes through Alkali-Activation: Preparation, Characterization, and Challenges. In: Buildings, v. 14, n. 1 (31 Dezember 2023).
- (2024): A quantitative digital twin maturity model for underground infrastructure based on D-ANP. In: Tunnelling and Underground Space Technology, v. 146 (April 2024).
- (2023): Performance of high strength steel bar splice with novel grouted deformed sleeve under tensile load. In: Construction and Building Materials, v. 403 (November 2023).
- (2023): A prediction model of the tensile properties of engineered cementitious composites (ECC) based on the continuous crack tracking algorithm. In: Journal of Building Engineering, v. 79 (November 2023).
- (2023): Performance of foam-filled kirigami corrugated sandwich panels as sacrificial cladding against blast loads. In: Journal of Building Engineering, v. 76 (Oktober 2023).
- (2024): Performance Evaluation of Water Environment Treatment PPP Projects Based on Multisource Spatiotemporal Data Fusion. In: Journal of Infrastructure Systems, v. 30, n. 1 (März 2024).
- (2023): On the chemo-mechanical evolution process of high-volume slag cement paste. In: Construction and Building Materials, v. 400 (Oktober 2023).
- (2023): Performance of steel fiber reinforced concrete mixed with chloride solution and exposed to high humidity environment. In: Construction and Building Materials, v. 393 (August 2023).
- (2023): Optimization of integrating life cycle cost and systematic resilience for grey-green stormwater infrastructure. In: Sustainable Cities and Society, v. 90 (März 2023).
- (2023): Parametric model order reduction and vibration analysis of pipeline system based on adaptive dynamic substructure method. In: Structures, v. 50 (April 2023).
- (2023): Preparation of belite-sulfoaluminate cement with phosphate-rock acid-insoluble residue: Modification and influence of impurity ions on cement properties. In: Construction and Building Materials, v. 365 (Februar 2023).
- (2022): The Optimum Percentage of Nano Clay (NC) in Both Direct-Additive and Sonicated Modes to Improve the Mechanical Properties of Self-Compacting Concrete (SCC). In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2022): Preparation of belite–sulphoaluminate cement using phosphate rock acid-insoluble residue. In: Construction and Building Materials, v. 323 (März 2022).
- (2022): Relationship between water transport behaviour and interlayer voids of 3D printed concrete. In: Construction and Building Materials, v. 326 (April 2022).
- (2022): Reinforced Concrete Beams Strengthened in Flexure with Near-Surface Mounted 7075 Aluminum Alloy Bars. In: Journal of Structural Engineering (ASCE), v. 148, n. 1 (Januar 2022).
- (2021): A Novel Structural Reliability Method on the Basis of Gaussian Mixture and Scaled Unscented Transformation. In: Journal of Engineering Mechanics (ASCE), v. 147, n. 12 (Dezember 2021).
- (2001): Precipitative Removal of Fluoride from Electronics Wastewater. In: Journal of Environmental Engineering (ASCE), v. 127, n. 10 (Oktober 2001).
- (2014): Parametric Analysis of Seismic Performance of RC Columns Strengthened with Steel Wire Mesh. In: Journal of Highway and Transportation Research and Development (English Edition), v. 8, n. 3 (September 2014).
- (2020): RANS CFD simulations can be successfully used for simulating snowdrift on roofs in a long period of snowstorm. In: Building Simulation, v. 13, n. 6 (August 2020).
- (2021): Optimal decision-making for tall buildings in the aftershock environment. In: Automation in Construction, v. 122 (Februar 2021).
- (2014): On effective characteristic of Rayleigh surface wave propagation in porous fluid-saturated media at low frequencies. In: Soil Dynamics and Earthquake Engineering, v. 57 (Februar 2014).
- (2017): Refined Stress Check of Special Concrete Box Girder Bridges at Serviceability Limit State. Vorgetragen bei: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
- (2017): Postnourishment Evolution of Beach Profiles in a Low-Energy Sandy Beach with a Submerged Berm. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 143, n. 4 (Juli 2017).
- (2019): Pattern recognition approach to assess the residual structural capacity of damaged tall buildings. In: Structural Safety, v. 78 (Mai 2019).
- (2014): Nonlinear seismic analysis of reinforced concrete frames using the force analogy method. In: Earthquake Engineering and Structural Dynamics, v. 43, n. 14 (November 2014).
- (2016): Orthogonal analysis and optimization of a K4-rating auto-lifting anti-ram bollard system. In: International Journal of Steel Structures, v. 16, n. 2 ( 2016).
- (2017): A numerical model for edge waves on a compound slope. In: China Ocean Engineering, v. 31, n. 2 (April 2017).
- (2015): Nonlinear Seismic Analysis of Reinforced Concrete Bridges Using the Force Analogy Method. In: Journal of Bridge Engineering (ASCE), v. 20, n. 10 (Oktober 2015).
- (2015): The Nonlinear hysteretic behavior simulation of reinforced concrete shear walls using the force analogy method. In: The Structural Design of Tall and Special Buildings, v. 24, n. 7 (Mai 2015).
Structurae kooperiert mit
