Yamei Zhang 
- (2024): Influence of waste glass powder on printability and mechanical properties of 3D printing geopolymer concrete. In: Developments in the Built Environment, v. 20 (Dezember 2024).
- (2024): Influence of different supplementary cementitious materials on water distribution and rheological behavior of blended cement paste. In: Construction and Building Materials, v. 443 (September 2024).
- (2024): Effect of steel fiber shape and content on printability, microstructure and mechanical properties of 3D printable high strength cementitious materials. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): Development of a novel extrusion device to improve the printability of 3D printable geopolymer concrete. In: Journal of Building Engineering, v. 88 (Juli 2024).
- (2024): Effect of recycled brick powder with various particle features on early-age hydration, water state, and rheological properties of blended cement paste in the context of 3D Printing. In: Construction and Building Materials, v. 418 (März 2024).
- (2024): Early-age inhomogeneous deformation of 3D printed concrete: Characteristics and influences of superplasticizer and water-binder ratio. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2024): Exploring the potential for carrying capacity and reusability of 3D printed concrete bridges: Construction, dismantlement, and reconstruction of a box arch bridge. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2023): Effect of low-calcium and high-magnesium ferronickel slag on the microstructure and micromechanical properties of alkali-activated blended ground granulated blast furnace slag. In: Construction and Building Materials, v. 406 (November 2023).
- (2024): Effects of dicalcium ferrite on hydration and microstructure of cementitious material. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2023): Improving mechanical properties of 3D printable ‘one-part’ geopolymer concrete with steel fiber reinforcement. In: Journal of Building Engineering, v. 75 (September 2023).
- (2023): Effect of metakaolin on the microstructure of cement-based artificial marble slabs incorporating natural marble offcuts under vacuum vibration compaction method. In: Construction and Building Materials, v. 369 (März 2023).
- (2022): 3D printing lightweight aggregate concrete prepared with shell-packing-aggregate method - Printability, mechanical properties and pore structure. In: Journal of Building Engineering, v. 62 (Dezember 2022).
- (2022): Bond behavior between steel bars and 3D printed concrete: Effect of concrete rheological property, steel bar diameter and paste coating. In: Construction and Building Materials, v. 349 (September 2022).
- (2021): Experiments and finite element analysis for detecting the embedded defects in concrete using PZT transducers. In: Construction and Building Materials, v. 292 (Juli 2021).
- (2021): Effects of heat treatment on surface physicochemical properties and sorption behavior of bamboo (Phyllostachys edulis). In: Construction and Building Materials, v. 282 (Mai 2021).
- (2022): Effect of Predrying Temperature on Carbonation of Alkali-Activated Slag Pastes. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 6 (Juni 2022).
- (2022): Effect of drying environment on mechanical properties, internal RH and pore structure of 3D printed concrete. In: Construction and Building Materials, v. 315 (Januar 2022).
- (2021): Effect of nano-alumina modified foaming agents on properties of foamed concrete. In: Construction and Building Materials, v. 267 (Januar 2021).
- (2020): Energy-saving potential of 3D printed concrete building with integrated living wall. In: Energy and Buildings, v. 222 (September 2020).
- (2020): Behavior of geopolymeric recycled aggregate concrete-filled FRP tube (GRACFFT) columns under lateral cyclic loading. In: Engineering Structures, v. 222 (November 2020).
- (2020): Hydration and soundness properties of phosphoric acid modified steel slag powder. In: Construction and Building Materials, v. 254 (September 2020).
- (2018): Hydration products, internal relative humidity and drying shrinkage of alkali activated slag mortar with expansion agents. In: Construction and Building Materials, v. 158 (Januar 2018).
- (2012): Fracture process of rubberized concrete by fictitious crack model and AE monitoring. In: Computers and Concrete, v. 9, n. 1 (Januar 2012).
- (2019): The influence of steel slag and ferronickel slag on the properties of alkali-activated slag mortar. In: Construction and Building Materials, v. 227 (Dezember 2019).
- (2019): Identification of odorous constituents of bamboo during thermal treatment. In: Construction and Building Materials, v. 203 (April 2019).
- (2016): Influence of chloride concentration and pre-passivation on the pitting corrosion resistance of low-alloy reinforcing steel in simulated concrete pore solution. In: Construction and Building Materials, v. 111 (Mai 2016).
- (2017): Corrosion performance of reinforcing steel in concrete under simultaneous flexural load and chlorides attack. In: Construction and Building Materials, v. 149 (September 2017).
- (2017): Flexural behavior and microstructure of hybrid basalt textile and steel fiber reinforced alkali-activated slag panels exposed to elevated temperatures. In: Construction and Building Materials, v. 152 (Oktober 2017).
- (2018): Characterisation of the interfacial transition zone in mortars by nanoindentation and scanning electron microscope. In: Magazine of Concrete Research, v. 70, n. 18 (September 2018).
- (2018): Effects of foaming agent type on the workability, drying shrinkage, frost resistance and pore distribution of foamed concrete. In: Construction and Building Materials, v. 186 (Oktober 2018).
Structurae kooperiert mit
