Tengfei (Tim) Zhang 
- (2024): Inverse identification of a pollutant source in an apartment with multiple rooms by joint multi-zone model and CFD. In: Sustainable Cities and Society, v. 113 (Oktober 2024).
- (2024): Impacts of gaps below both door and partition walls of cubicles on odorous gas transport and respiratory infection in a public lavatory. In: Building and Environment, v. 254 (April 2024).
- (2024): Evolution of particle size distribution and water content for oily particles in machining workshops. In: Journal of Building Engineering, v. 84 (Mai 2024).
- (2024): Modification of grilles to improve the lavatory environment on an aircraft. In: Building and Environment, v. 252 (März 2024).
- (2023): Modeling and measurement of dynamic air exchange of a machining cabin with the surroundings after opening of the cabin door. In: Building and Environment, v. 239 (Juli 2023).
- (2023): Evaluation of infection probability of Covid-19 in different types of airliner cabins. In: Building and Environment, v. 234 (April 2023).
- (2023): Inverse design of a thermally comfortable indoor environment with a coupled CFD and multi-segment human thermoregulation model. In: Building and Environment, v. 227 (Januar 2023).
- (2022): An aisle displacement ventilation system for twin-aisle commercial airliner cabin. In: Building and Environment, v. 223 (September 2022).
- (2022): A Modified Surgical Face Mask to Improve Protection and Wearing Comfort. In: Buildings, v. 12, n. 5 (24 April 2022).
- (2022): Modeling and Measuring the Leaked-Air Rate into the Insulation Layer of a Single-Aisle Aircraft Cabin. In: Buildings, v. 12, n. 5 (24 April 2022).
- (2022): Measuring the flushing-generated flow and aerosols in lavatory of commercial aircraft. In: Building and Environment, v. 214 (April 2022).
- (2022): Measuring moisture content in building insulation materials by a hot film. In: Science and Technology for the Built Environment, v. 28, n. 3 (März 2022).
- (2022): Influencing factors in the simulation of airflow and particle transportation in aircraft cabins by CFD. In: Building and Environment, v. 207 (Januar 2022).
- (2021): Numerical Investigation of Bioaerosol Transport in a Compact Lavatory. In: Buildings, v. 11, n. 11 (8 November 2021).
- (2021): Experimental evaluation of particle exposure at different seats in a single-aisle aircraft cabin. In: Building and Environment, v. 202 (September 2021).
- (2018): Measured moisture accumulation in aircraft walls during simulated commercial flights. In: Science and Technology for the Built Environment, v. 24, n. 8 (September 2018).
- (2016): Improving the built environment from the systematic view. In: Science and Technology for the Built Environment, v. 23, n. 2 (Dezember 2016).
- (2010): Considering building energy from environmental perspective. In: Energy and Buildings, v. 42, n. 1 (Januar 2010).
- (2014): Inverse determination of wall boundary convective heat fluxes in indoor environments based on CFD. In: Energy and Buildings, v. 73 (April 2014).
- (2014): Prediction of airflow rate through a ventilated wall module. In: Energy and Buildings, v. 82 (Oktober 2014).
- (2019): Inverse design of aircraft cabin ventilation by integrating three methods. In: Building and Environment, v. 150 (März 2019).
- (2017): Experimental identification of key parameters contributing to moisture accumulation in an aircraft section. In: Building and Environment, v. 126 (Dezember 2017).
- (2017): Inverse identification of multiple temporal sources releasing the same tracer gaseous pollutant. In: Building and Environment, v. 118 (Juni 2017).
- (2016): Prompt design of the air-supply opening size for a commercial airplane based on the proper orthogonal decomposition of flows. In: Building and Environment, v. 96 (Februar 2016).
- (2015): Optimal specification of target temperature points for inverse design of an indoor thermal environment. In: Building and Environment, v. 92 (Oktober 2015).
- (2015): Measuring moisture content in a porous insulation material using a hot wire. In: Building and Environment, v. 84 (Januar 2015).
- (2013): An adjustment to the standard temperature wall function for CFD modeling of indoor convective heat transfer. In: Building and Environment, v. 68 (Oktober 2013).
- (2012): Insulation of commercial aircraft with an air stream barrier along fuselage. In: Building and Environment, v. 57 (November 2012).
- (2012): A personal air distribution system with air terminals embedded in chair armrests on commercial airplanes. In: Building and Environment, v. 47 (Januar 2012).
- (2010): Flow impact of an air conditioner to portable air cleaning. In: Building and Environment, v. 45, n. 9 (September 2010).
Structurae kooperiert mit
