Quan Zhang 
- (2024): Experimental and Numerical Studies of the Failure Mode and Mechanical Performance of Helices in Screw Piles. In: International Journal of Civil Engineering, v. 22, n. 5 (Januar 2024).
- (2024): Mechanical behavior and constitutive relationship of bond interface in steel plate-reinforced shield tunnels. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2023): An advanced control strategy for optimizing the operation state of chillers with cold storage technology in data center. In: Energy and Buildings, v. 301 (Dezember 2023).
- (2023): Real-time temperature distribution reconstruction via linear parameter-varying state-space model and Kalman filter in rack-based cooling data centers. In: Building and Environment, v. 242 (August 2023).
- (2023): Predicting the Fracture Characteristics of Concrete Using Ensemble and Meta-heuristic Algorithms. In: KSCE Journal of Civil Engineering, v. 27, n. 7 (Juni 2023).
- (2023): Comparative study on different energy-saving plans using water-side economizer to retrofit the computer room air conditioning system. In: Journal of Building Engineering, v. 69 (Juni 2023).
- (2022): Real-time temperature predictions via state-space model and parameters identification within rack-based cooling data centers. In: Journal of Building Engineering, v. 58 (Oktober 2022).
- (2015): Estimating the Adaptability of Phase Change Material Board on Building Envelope of Telecommunications Base Stations. In: Procedia Engineering, v. 121 ( 2015).
- (2021): Extradosed cable‐stayed Pelješac Bridge in Croatia – Fabrication of steel box girders and on‐site installation. In: Steel Construction, v. 15, n. 1 (Oktober 2021).
- (2021): Experimental characterization and modular modeling of hystereses for smart material actuators. In: Smart Materials and Structures, v. 30, n. 12 (November 2021).
- (2018): Model of Parallel-Type Acceleration Lane Length. In: Journal of Highway and Transportation Research and Development (English Edition), v. 12, n. 2 (Juni 2018).
- (2020): Experimental study and steady-state model of a novel plate loop heat pipe without compensation chamber for CPU cooling. In: Sustainable Cities and Society, v. 53 (Februar 2020).
- (2019): Optimization and sensitivity analysis of design parameters for a ventilation system using phase change materials. In: Building Simulation, v. 12, n. 6 (August 2019).
- (2020): Research on the Attenuation Characteristics of AE Signals of Marble and Granite Stone. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2016): Analytical solution and economic impact for improved p(t)-linear average method to estimate the ground thermal properties during in situ thermal response test. In: Science and Technology for the Built Environment, v. 23, n. 2 (Dezember 2016).
- (2009): A comparative analysis of urban and rural residential thermal comfort under natural ventilation environment. In: Energy and Buildings, v. 41, n. 2 (Februar 2009).
- (2011): Artificial neural network analysis of the performance characteristics of a reversibly used cooling tower under cross flow conditions for heat pump heating system in winter. In: Energy and Buildings, v. 43, n. 7 (Juli 2011).
- (2016): Energy saving potential of a ventilation system with a latent heat thermal energy storage unit under different climatic conditions. In: Energy and Buildings, v. 118 (April 2016).
- (2016): An advanced control of hybrid cooling technology for telecommunication base stations. In: Energy and Buildings, v. 133 (Dezember 2016).
- (2017): Experimental study on operation characteristics of a novel refrigeration system using phase change material. In: Energy and Buildings, v. 150 (September 2017).
- (2018): Application of model-based control strategy to hybrid free cooling system with latent heat thermal energy storage for TBSs. In: Energy and Buildings, v. 167 (Mai 2018).
- (2020): Performance of a cold storage air-cooled heat pump system with phase change materials for space cooling. In: Energy and Buildings, v. 228 (Dezember 2020).
- (2020): Effect of resin pre-coating method on repairing subsurface micro-defects in sandstone and granite. In: Construction and Building Materials, v. 264 (Dezember 2020).
- (2019): Reliability and availability analysis of a hybrid cooling system with water-side economizer in data center. In: Building and Environment, v. 148 (Januar 2019).
- (2019): Impact of uncertainties on the supervisory control performance of a hybrid cooling system in data center. In: Building and Environment, v. 148 (Januar 2019).
- (2011): Mass concentrations of BTEX inside air environment of buses in Changsha, China. In: Building and Environment, v. 46, n. 2 (Februar 2011).
- (2009): Mathematical model of particle penetration through smooth/rough building envelop leakages. In: Building and Environment, v. 44, n. 6 (Juni 2009).
- (2007): Field study on occupants’ thermal comfort and residential thermal environment in a hot-humid climate of China. In: Building and Environment, v. 42, n. 12 (Dezember 2007).
Structurae kooperiert mit
