Jun Zhang 
- (2024): Attachment detection on the inner wall of gas-liquid two phase flow pipe based on ultrasonic guided waves. In: Journal of Building Engineering, v. 97 (November 2024).
- (2024): Construction of flame retardant functionalized carbon dot with insulation, flame retardancy and thermal conductivity in epoxy resin. In: Construction and Building Materials, v. 451 (November 2024).
- (2025): Coal-rock interface real-time recognition based on the improved YOLO detection and bilateral segmentation network. In: Underground Space, v. 21 (April 2025).
- : Bridge monitoring using smartphones installed on driving vehicles: oriented to crowdsourcing model. In: International Journal of Structural Stability and Dynamics.
- (2024): Anti-creep pretension determination of a mesh reflector antenna for long term surface accuracy retention. In: Computers & Structures, v. 301 (September 2024).
- (2024): Calculation of creep deformation of stiffness-degraded RC beams after strengthening with increased cross-section. In: Structures, v. 67 (September 2024).
- (2024): Adsorption behaviors of ethyltriethoxysilane on the calcium silicate hydrate surface: Effect of Ca/Si ratio and adsorption sites. In: Construction and Building Materials, v. 429 (Mai 2024).
- (2024): Bayesian optimization based extreme gradient boosting and GPR time-frequency features for the recognition of moisture damage in asphalt pavement. In: Construction and Building Materials, v. 434 (Juli 2024).
- (2023): Analytical solutions and optimization design for bending behavior of cross-laminated timber beams considering orthotropy and interface slip. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2023): Aerodynamic characteristics of a super high-speed elevator with different toe guards. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 233 (Februar 2023).
- (2022): Atypical adsorption of polycarboxylate superplasticizers on calcium silicate hydrate surface: Converting interaction by solvent effects. In: Construction and Building Materials, v. 330 (Mai 2022).
- (2013): Calculation of Shrinkage Stress in Early-Age Concrete Pavements. I: Calculation of Shrinkage Strain. In: Journal of Transportation Engineering, v. 139, n. 10 (Oktober 2013).
- (2013): Calculation of Shrinkage Stress in Early-Age Concrete Pavements. II: Calculation of Shrinkage Stress. In: Journal of Transportation Engineering, v. 139, n. 10 (Oktober 2013).
- (2021): Calculation of Deflection and Stress of Assembled Concrete Composite Beams under Shrinkage and Creep and Its Application in Member Design Optimization. In: KSCE Journal of Civil Engineering, v. 25, n. 9 (Juni 2021).
- (2020): Accident-Oriented Delay Propagation in High-Speed Railway Network. In: Journal of Transportation Engineering, Part A: Systems, v. 146, n. 4 (April 2020).
- (2020): Automatic detection of moisture damages in asphalt pavements from GPR data with deep CNN and IRS method. In: Automation in Construction, v. 113 (Mai 2020).
- (2019): Characterization of LDHs prepared with different activity MgO and resisting Cl− attack of concrete in salt lake brine. In: Construction and Building Materials, v. 229 (Dezember 2019).
- (2019): Behavior of large-scale connections between circular concrete-filled steel tubular columns and H-section steel beams. In: Advances in Structural Engineering, v. 23, n. 2 (August 2019).
- (2009): Calculation of Moisture Distribution in Early-Age Concrete. In: Journal of Engineering Mechanics (ASCE), v. 135, n. 8 (August 2009).
- (2018): Bending mechanical properties research on prestressed airport concrete pavements. In: Structural Concrete, v. 19, n. 6 (Dezember 2018).
- (1992): Component Wave Interactions and Irregular Wave Kinematics. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 118, n. 4 (Juli 1992).
- (2013): Comparison of flow number, dynamic modulus, and repeated load tests for evaluation of HMA permanent deformation. In: Construction and Building Materials, v. 44 (Juli 2013).
- (2015): Characterizing the cracking and fracture properties of geosynthetic interlayer reinforced HMA samples using the Overlay Tester (OT). In: Construction and Building Materials, v. 93 (September 2015).
- (2017): Analysis on the deflection and load transfer capacity of a prefabricated airport prestressed concrete pavement. In: Construction and Building Materials, v. 157 (Dezember 2017).
- (2017): Bonding characteristics of grouting layer in Prefabricated Cement Concrete Pavement. In: Construction and Building Materials, v. 145 (August 2017).
- (2014): Combination Effects of Internal Curing and Permanent Formwork on Shrinkage of High Strength Concrete. In: Journal of Advanced Concrete Technology, v. 12, n. 11 ( 2014).
- (2018): Cement Hydration Rate of Ordinarily and Internally Cured Concretes. In: Journal of Advanced Concrete Technology, v. 16, n. 7 (Juli 2018).
- (2014): Cement hydration based model to predict the mechanical properties of precast concrete. In: Magazine of Concrete Research, v. 66, n. 12 (Juni 2014).
- (2016): A compressive sensing-based approach for Preisach hysteresis model identification. In: Smart Materials and Structures, v. 25, n. 7 (Juli 2016).
- (2018): Characterization of Crack Growth Rate of Sulfur-Extended Asphalt Mixtures Using Cyclic Semicircular Bending Test. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 12 (Dezember 2018).
Structurae kooperiert mit
