Jian Zhang 
- (2024): Optimization of strength and microstructural properties of building gypsum by ternary Ca(OH)2 - citric acid and PCEs additives. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): A new database of building-space-specific internal loads and load schedules for performance based code compliance modeling of commercial buildings. In: Building Simulation, v. 17, n. 6 (März 2024).
- (2024): A novel stick-slip piezoelectric actuator is developed based on a parallelogram flexible drive mechanism to minimize shear force. In: Smart Materials and Structures, v. 33, n. 7 (7 Juni 2024).
- (2024): Nonlinear dynamic morphing of conical bistable dielectric elastomer actuator. In: Smart Materials and Structures, v. 33, n. 3 (2 Februar 2024).
- (2023): Numerical modeling of microstructure development and chloride diffusion coefficient of cement paste with ellipsoidal particles. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2023): Numerical Study on the Damage Characteristics of Layered Shale Using 3D DEM. In: KSCE Journal of Civil Engineering, v. 27, n. 12 (Oktober 2023).
- (2023): Online monitoring of crack dynamic development using attention-based deep networks. In: Automation in Construction, v. 154 (Oktober 2023).
- (2023): Numerical simulation of effect of reclaimed asphalt pavement on damage evolution behavior of self-compacting concrete under compressive loading. In: Construction and Building Materials, v. 395 (September 2023).
- (2022): Numerical simulation of cost-effective green high-ductility engineered cementitious composites based on meso-scale particle flow model. In: Construction and Building Materials, v. 356 (November 2022).
- (2022): A novel shrinkage-reducing polycarboxylate superplasticizer for cement-based materials: Synthesis, performance and mechanisms. In: Construction and Building Materials, v. 321 (Februar 2022).
- (2021): New numerical method for predicting chloride diffusivity of concrete considering the profiles of practical aggregates. In: Construction and Building Materials, v. 290 (Juli 2021).
- (2016): Optimal layout of long-gauge sensors for deformation distribution identification. In: Smart Structures and Systems, v. 18, n. 3 (September 2016).
- (2022): Numerical study on the seismic performance of precast UHPC bridge columns considering the buckling behavior of replaceable energy dissipaters. In: Structure and Infrastructure Engineering, v. 18, n. 2 (Juni 2022).
- (2021): Numerical Scheme for Predicting Chloride Diffusivity of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 9 (September 2021).
- (2021): A novel treatment method and construction technology of the pipeline gushing water geohazards in karst region. In: Tunnelling and Underground Space Technology, v. 113 (Juli 2021).
- (2021): Noncontact cable force estimation with unmanned aerial vehicle and computer vision. In: Computer-Aided Civil and Infrastructure Engineering, v. 36, n. 1 (19 Dezember 2021).
- (2020): Numerical study on seismic behavior of precast bridge columns with large-diameter bars and UHPC grout considering the bar-slip effect. In: Bulletin of Earthquake Engineering, v. 18, n. 10 (Juni 2020).
- (2018): A numerical algorithm for evaluating the chloride diffusion coefficient of concrete with crushed aggregates. In: Construction and Building Materials, v. 171 (Mai 2018).
- (2017): Oblique tunnel portal effects on train and tunnel aerodynamics based on moving model tests. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 167 (August 2017).
- (2019): A New Method based on Centrifuge Model Test for Evaluating Ground Settlement Induced by Tunneling. In: KSCE Journal of Civil Engineering, v. 23, n. 6 (Mai 2019).
- (2019): Numerical Method for Predicting Chloride Diffusivity of Mature Cement Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 6 (Juni 2019).
- (2015): OpenSeesSoftware Architecture for the Analysis of Structures in Fire. In: Journal of Computing in Civil Engineering, v. 29, n. 1 (Januar 2015).
- (2014): Optimization Method and Experimental Study on the Shear Strength of Externally Prestressed Concrete Beams. In: Advances in Structural Engineering, v. 17, n. 4 (April 2014).
- (2007): Non-linear system identification of the versatile-typed structures by a novel signal processing technique. In: Earthquake Engineering and Structural Dynamics, v. 36, n. 7 (Juni 2007).
- (2012): A new impact testing method for efficient structural flexibility identification. In: Smart Materials and Structures, v. 21, n. 5 (Mai 2012).
- (2018): A novel framework for deriving the unified SCF in multi-planar overlapped tubular joints. In: Marine Structures, v. 60 (Juli 2018).
- (2014): Nonlinear Behavior and Simulation of Concrete Columns Reinforced by Steel-FRP Composite Bars. In: Journal of Bridge Engineering (ASCE), v. 19, n. 2 (Februar 2014).
- (2018): Optimal design of isolation devices for mid-rise steel moment frames using performance based methodology. In: Bulletin of Earthquake Engineering, v. 16, n. 9 (Februar 2018).
- (2017): Optimal Design of Seismic Protective Devices for Highway Bridges Using Performance-Based Methodology and Multiobjective Genetic Optimization. In: Journal of Bridge Engineering (ASCE), v. 22, n. 3 (März 2017).
- (2007): Novel support vector regression for structural system identification. In: Structural Control and Health Monitoring, v. 14, n. 4 (Juni 2007).
Structurae kooperiert mit
